LORD^® Engineered Adhesives

	TYPICAL PROPERTIES
	Appearance	Off-white Liquid
	Work Time, min	1-2
	Handling Time, min	2-4
	Cure Time, hr	24*
	Typical Viscosity, cP	8,000-32,000
	Density, lb/gal (kg/m3)	9.6-10.35 (1150-1240)
	* Reaches 90% of ultimate strength after 2 hours.
Back »

LORD 202 Acrylic Adhesive

LORD^® 202 Acrylic Adhesive when mixed with LORD Accelerator 4, 17, 18 or 19 creates a fast curing adhesive system that will quickly bond a wide variety of prepared or unprepared metals and plastics. LORD 202 Acrylic Adhesive in combination with the recommended accelerator replaces welding, brazing, riveting and other mechanical fastening methods.

LORD 202 Acrylic Adhesive can be mixed with either
LORD Accelerator 4, LORD Accelerator 17, LORD Accelerator 18 or LORD Accelerator 19. LORD Accelerator 4 is a no-mix accelerator applied to the substrate before the acrylic adhesive. LORD Accelerators 17, 18 and 19 must be mixed into the acrylic adhesive prior to application. LORD Accelerator 19 is available in off-white or black.

Product Information

• Technical Data Sheet
• Material Safety Data Sheet (MSDS)
• Where to Buy

Download Catalog »

Compare LORD 200 Series Acrylic Adhesives »

Cautionary Information
Before using any LORD product, refer to the Material Safety Data Sheet (MSDS) and label for safe use and handling instructions.

For industrial/commercial use only. Must be applied by trained personnel only. Not to be used in household applications. Not for consumer use.