LORD Corporation Develops New Low HAP Primer and Adhesives
(09/29/2011)
The availability of a series of general purpose Chemlok® adhesives using low HAP solvents has been announced by LORD Corporation.
Designed for industrial customers who are looking to bond a wide variety of elastomers to various metals and other rigid substrates during vulcanization of the elastomer, LORD Chemlok adhesives and primer are environmentally resistant and easy to apply. The series includes LORD Chemlok 205LH , LORD Chemlok 207LH Primer and 220LH and 6411LH low Hazardous Air Pollutant (HAP) adhesives. These products offer our customers an alternative to our key performers but in an alternative solvent system.
According to Karen Sy-Laughner, Industrial Marketing Manager, Americas, at LORD Corporation, "Environmental regulations are constantly evolving. As leaders in our industry, we realize the importance of providing our customers with a variety of choices. Our strategy is to offer not only aqueous Chemloks as our environmentally preferred solutions but also other products with alternative solvents. We believe this would provide our customers with the ability to select the solution that best fits their needs."
LORD Chemlok 220LH and 6411LH adhesives are low HAP, lead-free covercoat adhesives designed for use over Chemlok 205LH or 207LH primer. Composed of a mixture of polymers, organic compounds and mineral fillers dissolved or dispersed in a low HAP organic solvent system, the 220LH and 6411LH adhesive systems will bond compounds based on natural rubber (NR), polyisoprene (IR), styrene-butadiene (SBR), polycholorprene (CR) and nitrile (NBR) to most metals and rigid plastic substrates. Using the Chemlok 205LH or 207LH primer helps to ensure environmental resistance of the bonded assembly and adhesion to the substrate.
Chemlok 220LH can be applied easily by dip, spray or brush methods, and Chemlok 6411LH can be sprayed. Both adhesives provide good resistance to heat, fluids and corrosive atmospheres. Further, the Chemlok 205LH and 207LH primer have durable rubber tearing bonds and excellent environmental resistance, used in combination with Chemlok 220LH or 6411LH, provides a brilliant blue color for easy identification. With excellent resistance to a wide range of environmental conditions including hot solutions of ethylene/propylene glycol and water, Chemlok 207LH is suitable for existing production lines.
More information on LORD Chemlok primers and adhesives can be found at www.lord.com . Additional information can be obtained by contacting LORD Corporation by e-mail at customer.support@lord.com or by phone at +1 877 ASK LORD (275 5673).



LORD Corporation has announced that employees Cindy Fowle, Charmaine Riggins, and Athena Theodorakis each received ...