Press Releases
According to Lynn Yanyo, Sales and Marketing Director for the LORD Electronic Boards and Components Industry Group, many suppliers are basic in a single polymeric material, and therefore only have one chemistry in their portfolio.
LORD Corporation recently highlighted the success of three representative agencies for their sales, service and marketing efforts.
Mexico's American Coach is a national manufacturer of premium intercity coaches known for quality. That is why - after learning that several major automotive manufacturers have used structural adhesives on more than 50 million cars for 25 years to minimize the use of unsightly screws on the body wor...
The new seam sealer can be sprayed on prepared surfaces including primed or painted metal, SMC and fiberglass. Beige in color to match European and Asian vehicles, Fusor 806 has a tough but flexible surface that protects metal from stone chips. Paintable immediately, which reduces repair time, it of...
LORD Corporation will host the International Microelectronics and Packaging Society (IMAPS) Carolinas Chapter on Oct. 22. The half-day event will include four presentations and a tour of LORD Corporation's facility. The event will begin with a lunch at noon and will be followed by four 30 minute pre...
LORD Corporation has been awarded a contract for the Cessna Model 850 Citation Columbus large cabin intercontinental business jet. LORD will provide the engine and APU isolation system for the Columbus business jet from its plants in Erie, Pa. and Dayton, Ohio. The system will enable Cessna to offe...
LORD Corporation's proprietary shimmy damper recently achieved Supplemental Type Certificate (STC) #SA02546NY and PMA Supplement 104 for most models of the Cessna Aircraft Company 300/400 Series. Offered as PMA equipment for most models of Cessna's 300/400 Series Aircraft, the nose wheel shimmy damp...
LORD Corporation has been awarded a contract for the Cessna Model 850 Citation Columbus large cabin intercontinental business jet.
The resilient floor coatings business primarily serves industrial manufacturers of polymeric and wood flooring and includes the trade name Photoglaze UV-Cure Coatings and associated Chemglaze Seam Sealers product line in the U.S., Europe and China. Completion of the transaction is expected by the en...
In today's environment of ever-increasing energy costs, any and all measures to decrease monetary outlays should be considered. That is why many are switching to a RoHS-compliant polymer resistor system offered by LORD Corporation - a leading supplier of thermal management materials, adhesives, coat...
LORD Corporation has been selected by Korea Aerospace Industry (KAI) and Korean Air (KA) to supply main and tail rotor spherical bearings and dampers for the Korean Utility Helicopter (KUH) program. The 8-ton utility transport helicopter, which is slated for first flight in 2010 and production in 20...
In today's global marketplace, it is pretty common for a large customer to ask their supplier to find a better and cheaper way to make their product. Such was the case for Stern Industries - a polymer components developer and manufacturer for the automotive, recreational vehicle, medical, electronic...
LORD Corporation has developed a new high-performance Gelease material. According to Sara N. Paisner, Senior Scientist for LORD Microelectronics Technology, LORD Corporation's improved gel material, developed in response to market need, offers many advantages as compared to competing grease products...
LORD Corporation has developed a non-Silicone Thermal Die Lid Attach (TDLA) Adhesive. According to Sara N. Paisner, Senior Scientist for LORD Microelectronics Technology, LORD developed the TDLA in response to customers looking for a single material to replace having to use two existing materials th...
LORD Corporation has developed high thermal conductivity greases designed to maximize the heat transfer from high-end chips to the heat spreader. According to Sara N. Paisner, Senior Scientist for LORD Microelectronics Technology, as the chips continue to significantly increase in heat, they need mo...
Even though a typical thermal solution for a flip chip package uses thermal interface materials to drive the heat to the heat sink, some of today's complicated flip chip packaging constraints do not allow for dissipating the heat through the back side of the die.
LORD Corporation has announced a $2.5 million renovation to its electronic materials labs in Cary, N.C. According to John Hill, Technology Manager for LORD Corporation's Electronic Boards and Components Industry Group, the expansion - which includes not only additional physical space but also new eq...
Designed to bond many types of rigid plastic to bare metal, the OEM-proven LORD Fusor 116/117 Plastic to Metal Cross Bonding Adhesive is corrosion resistant and has a lifetime guarantee. This product bonds plastics such as fiberglass, FRP, SMC, carbon fiber, ABS, Metton, polycarbonate and acrylic.
LORD Corporation has announced that that their proprietary glycol MR fluids are now available for general evaluation. Already in the testing and validation stage by eight major vibration isolation companies seeking higher performance at a lower cost, LORD Corporation's glycol MR fluids are a proven ...
Carl Lechner, LORD National Accounts Manager, said this award signifies the close working relationship between the two companies. "We are pleased to have been recognized with this honor," said Lechner. "Sherwin-Williams is an important national account for LORD and we work hard to fulfill their supp...
LORD Corporation - maker of Fusor Automotive Repair Adhesives - the leading metal and composite bonding solution for automotive body repair - was recently named 2007 Vendor of the Year by The International Autobody Marketing Group (I.A.M.G.), a national association of PBE warehouse distributors thro...
LORD Corporation was recently named 2007 Vendor of the Year by The International Autobody Marketing Group (I.A.M.G.), a national association of PBE warehouse distributors throughout the U.S. and Canada. According to Erika Brower, I.A.M.G. Operations Manager, the award is presented to one successful ...
LORD received the Preferred Supplier status award on April 1, at the Mercury Supplier Conference in Sarasota, FL; The level of Preferred Supplier was only awarded to an elite 12 of Mercury's top 62 suppliers invited to the conference.
LORD Corporation recently received the Silver Level of Performance Award from The Boeing Company for achieving excellent supplier performance on delivery, quality and a general performance assessment. A supplier to The Boeing Company for more than 40 years, LORD Corporation provides Boeing with a my...
LORD Corporation, maker of Fusor Automotive Repair Adhesives - the leading metal and composite bonding solution for automotive body repair - has announced the launch of four new products and a special offer on a LORD/Hendrick Motorsports Cooler.
Next
To meet a request for a state-of-the-art thermal interface material that would dissipate heat from high-powered com...
Even the most state-of-the-art technology sometimes has room for improvement. Although a recently developed light h...
With more than 100 components comprising a helicopter's rotor, OEM face tremendous supply and manufacturing strains...
Sometimes, a solution merely takes care of the problem at-hand. But every once in a while, that solution revolution...
Although one of the nation's leading manufacturers of custom aluminum trailers was initially skeptical about using ...
LORD Corporation has announced that employees Cindy Fowle, Charmaine Riggins, and Athena Theodorakis each received ...