|
100EZ/101EZ |
100EZ = 10.1 oz (300 mL)
101EZ = 1.7 oz (50 mL) |
|
|
Plastic Panel Repair Adhesive (Heat Set) |
Applications
Structural and cosmetic repair of body panels, hoods, deck and doors.
Substrates
Structural and cosmetic repair of all types of rigid body plastics such as SMC, GTX, fiberglass, Metton® and carbon fiber.
Features & Benefits
- One product for all body panels
- Easily sands to a feather edge to provide undetectable repairs
- No bull’s-eyes, read throughs or halos
|
OEM Approvals
Ford: SMC panel repair
GM: SMC panel repair
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
40 min. |
|
Handling Strength
Handling Strength at 180°F (82°C) |
3 hr.
10 min. |
| Adhesive Sandability at 180°F (82°C) |
10 min. |
| Part Paintability 180°F (82°C) |
60 min. | |
| 102 |
102 = 10.1 oz (300 mL) |
|
|
Plastic Panel Cosmetic Repair Adhesive (Fast) |
Applications
Body panels, hoods, decks and doors.
Substrates
Repair scratches and gouges on rigid plastics, SMC, fiberglass and GTX.
Features & Benefits
- Sandable in 15 to 20 minutes
- No bull’s-eyes, read throughs or halos
- Super strength epoxy formula
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
3 - 5 min. |
| Handling Strength |
15 - 20 min. |
| Adhesive Sandability |
15 - 20 min. |
| Part Paintability |
60 min. | |
| 114 |
114 = 5.07 oz (150 mL) |
|
|
Plastic Finishing Adhesive (Fast) |
Applications
Finishing adhesive for all plastic bumpers and body panels.
Substrates
Finishing adhesive for all plastics including PP, fiberglass, Metton®, Telene®, SMC, TEO and urethane.
Features & Benefits
- No plastic identification is required
- No adhesion promoters needed
- Sands to a perfect feather edge in 15 minutes or less
- Hand dispensed – no tips or gun required
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
2 - 3 min. |
| Handling Strength |
10 - 15 min. |
| Adhesive Sandability |
10 - 15 min. |
| Part Paintability |
60 min. | |
| 115 |
115 = 5.1 oz (150 mL) |
|
|
Plastic Finishing Adhesive (Medium) |
Applications
Finishing adhesive for all plastic bumpers and body panels.
Substrates
Finishing adhesive for all plastics including PP, fiberglass, Metton®, Telene®, SMC, TEO and urethane.
Features & Benefits
- No plastic identification is required
- No adhesion promoters needed
- Sands to a perfect feather edge in 15 minutes or less
- Hand dispensed – no tips or gun required
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
Work Time
Work Time at 80°F (26°C)
Work Time at 90°F (32°C)
Work Time at 100°F (37°C) |
15 - 17 min.
9 - 11 min.
6 - 8 min.
5 - 7 min. |
| Handling Strength |
60 min. |
| Adhesive Sandability |
50 - 60 min. |
| Part Paintability |
60 min. | |
| 116 |
116 = 10.1 oz (300 mL) |
|
|
Plastic to Metal Cross Bonding Adhesive (Medium) |
Applications
For cross-bonding bare metal to plastic, such as: Ground effects; hood scoops; door skins - composite or metal; Corvette body panel installations; Kemlite roofs - semi trailers; trailer walls; compact freight vehicles or RVs; factory truck hoods - aluminum brackets to composite, headlight buckets, etc.
Substrates
Bonding bare metal to fiberglass, FRP, SMC, carbon fiber, ABS, polycarbonate, acrylic.
Features & Benefits
- Controls thermal expansion, composite to metal
- Corrosion resistant with lifetime guarantee
- Cures four times faster than competing products
- Excellent gap-filling properties
- High strength - used in OEM applications
- 10:1 mix ratio
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
20 - 30 min. |
| Handling Strength |
60 - 90 min. |
| Part Paintability |
4 hr. |
| Full Cure |
4 hr. | |
| 117 |
117 = 10.1 oz (300 mL) |
|
|
Plastic to Metal Cross Bonding Adhesive (Slow) |
Applications
For cross-bonding bare metal to plastic, such as: Ground effects; hood scoops; door skins - composite or metal; Corvette body panel installations; Kemlite roofs - semi trailers; trailer walls; compact freight vehicles or RVs; factory truck hoods - aluminum brackets to composite, headlight buckets, etc.
Substrates
Bonding bare metal to fiberglass, FRP, SMC, carbon fiber, ABS, polycarbonate, acrylic.
Features & Benefits
- Controls thermal expansion, composite to metal
- Corrosion resistant with lifetime guarantee
- Cures four times faster than competing products
- Excellent gap-filling properties
- High strength - used in OEM applications
- 10:1 mix ratio
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
40 - 50 min. |
| Handling Strength |
2.5 - 3 hr. |
| Part Paintability |
8 hr. |
| Full Cure |
8 hr. | |
| 120/T20/T21 |
120 = 12.8 oz (380 mL)
T20 = 12.8 oz (380 mL)
T21 = 10.1 oz (300 mL) |
|
|
SMC Repair Adhesive (Slow) |
Applications
Bonding SMC and fiberglass body panels including large assembly bonding of fairings, body panels, spoilers, ground effects, wind deflectors, roofs and fender liners. Also repairs cracks, punctures and tears.
Substrates
Bonds and cosmetically repairs plastics, SMC and fiberglass to itself and primed metals.
Features & Benefits
- One product bonds and finishes all plastic panels
- Great for heavy-duty truck repair
- Incredible strength
|
OEM Approvals
GM: SMC panel repair/replacement, meets GM6448G
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
45 min. |
|
Handling Strength
Handling Strength at 180°F (82°C) |
4 hr.
15 - 20 min. |
|
Adhesive Sandability at 180°F (82°C) |
15 - 20 min. |
| Part Paintability at 180°F (82°C) |
60 min. | |
| 127EZ/128EZ |
127EZ = 10.1 oz (300 mL)
128EZ = 1.7 oz (50 mL) |
|
|
Plastic Bonding Adhesive (Slow) |
Applications
Bonding of plastic body panels, spoilers and ground effects. Excellent for cab extenders, glass wood and other surfaces.
Substrates
Bonding of SMC, fiberglass, carbon fiber and other plastics to itself and primed metal.
Features & Benefits
- High-strength structural adhesive
- Provides enough work time for bonding large body panels
- Easy to gun, non-sag formula
|
OEM Approvals
GM: SMC panel replacement, meets GM6448G GM composite panel replacement
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
50 - 60 min. |
|
Handling Strength
Handling Strength at 140°F (60°C) |
4 - 5 hr.
30 min. |
|
Part Paintability
Part Paintability at 140°F (60°C) |
4 hr.
30 min. | |
| 141/140 |
141 = 10.1 oz (300 mL)
140 = 1.7 oz (50 mL) |
|
|
Plastic Bonding Repair Adhesive (Super Fast) |
Applications
Structural bonding of bumper tabs, emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground effects.
Substrates
High-strength bonding adhesive for all plastics, primed and painted metals, glass, wood and other surfaces.
Features & Benefits
- Clear, non-yellowing structural adhesive
- Super fast cure
- High-strength, flexible bond
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
1 min. 30 sec. |
| Handling Strength |
5 min. |
| Adhesive Sandability |
30 min. |
| Part Paintability |
30 min. | |
| 142/143 |
142 = 10.1 oz (300 mL)
143 = 1.7 oz (50 mL) |
|
|
Extreme Bumper Repair Adhesive (Super Fast) |
Applications
Bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.
Substrates
Structural and cosmetic repair of all plastic bumpers including TPE, TPO, TEO, PP and ABS and can be used to bond SMC or fiberglass panels.
Features & Benefits
- One product for all structural and cosmetic repairs on bumpers
- Undetectable feather edge
- Sandable in minutes
- No need for plastic identification with use of 602EZ
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
1 min. 30 sec. |
| Handling Strength |
10 min. |
| Adhesive Sandability |
20 min. |
| Part Paintability |
30 min. |
|
| 147/148 |
147 = 10.1 oz (300 mL)
148 = 1.7 oz (50 mL) |
|
|
Plastic Bonding Adhesive (Medium) |
Applications
Installation and bonding of small body panels, spoilers, ground effects and headlight buckets.
Substrates
Bonding of SMC, fiberglass, carbon fiber and other plastics to itself and primed metal.
Features & Benefits
- High-strength structural adhesive
- Easy to gun, non-sag formula
- Provides faster cure time for smaller body panels
|
OEM Approvals
Ford: SMC bonding per 97S88
GM: TSB 01-08-64-012A, meets GM644AG GM composite panel replacement
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
5 - 7 min. |
|
Handling Strength
Handling Strength at 140°F (60°C) |
60 - 90 min.
15 min. |
|
Part Paintability
Part Paintability at 140°F (60°C) |
90 min.
15 min. | |
| 152/153 |
152 = 10.1 oz (300 mL)
153 = 1.7 oz (50 mL) |
|
|
Extreme Bumper Repair Adhesive (Fast) |
Applications
Bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.
Substrates
Structural and cosmetic repair of all plastic bumpers including TPE, TPO, PP and ABS and can be used to bond SMC or fiberglass panels.
Features & Benefits
- Enough work time for larger repairs; ideal for hot temperature conditions
- One product for all structural and cosmetic repairs on bumpers
- Undetectable feather edge
- Sandable in minutes
- No need for plastic identification with use of 602EZ
- On-demand cure with heat
|
OEM Approvals
GM: GM specification GMW7159
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
3 - 5 min. |
|
Handling Strength
Handling Strength at 140°F (60°C) |
30 min.
5 min. |
|
Adhesive Sandability
Adhesive Sandability at 140°F (60°C) |
90 min.
3 min. |
| Part Paintability |
2 hr. / 60 min. with heat cure | |
| 201EZ |
201EZ = (2) 32.0 oz (946 mL) |
|
|
Fiberglass and SMC Composite Plastic Panel Repair Adhesive |
Applications
Structural and cosmetic repair of body panels, hoods, deck and doors.
Substrates
Structural and cosmetic repair of all types of rigid body plastics such as SMC, GTX, fiberglass, Metton® and carbon fiber.
Features & Benefits
- One product for all body panels
- Easily sands to a feather edge to provide undetectable repairs
- No bull's eyes, read throughs or halos
- Hand dispensed - no tips or guns required
|
OEM Approvals
Ford: SMC panel repair
GM: SMC panel repair
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
40 min. |
|
Handling Strength
Handling Strength at 180°F (82°C) |
3 hr.
10 min. |
| Adhesive Sandability at 180°F (82°C) |
10 min. |
| Part Paintability at 180°F (82°C) |
60 min. | |
| T19 |
T19 = 10.1 oz (300 mL) |
|
|
Truck Plastic Bonding Adhesive (Super Fast) |
Applications
Installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels.
Substrates
Bonding of SMC, fiberglass, carbon fiver and other plastics to itself and to primed metal.
Features & Benefits
- Super-fast cure speed for small jobs and improved cycle time
- Easy to gun, non-sag formula
- Substantially stronger than conventional adhesives
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
3 - 5 min. |
|
Handling Strength
Handling Strength at 140°F (60°C) |
30 min.
10 min. | |
| T22 |
T22 = 10.1 oz (300 mL) |
|
Truck Plastic Bonding Adhesive (Fast) |
Applications
Installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels.
Substrates
Bonding of SMC, fiberglass, carbon fiber and other plastics to itself and to primed metal.
Features & Benefits
- Ideal for intermediate applications
- Easy to gun, non-sag formula
- Substantially stronger than conventional adhesives
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
5 - 8 min. |
|
Handling Strength
Handling Strength at 140°F (60°C) |
60 min.
15 min. |
|
| T23 |
T23 = 10.1 oz (300 mL) |
|
|
Truck Plastic Bonding Adhesive (Medium) |
Applications
Installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels.
Substrates
Bonding of SMC, fiberglass, carbon fiber and other plastics to itself and to primed metal.
Features & Benefits
- Extended work time for larger panels
- Easy to gun, non-sag formula
- Substantially stronger than conventional adhesives
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
20 - 30 min. |
|
Handling Strength
Handling Strength at 140°F (60°C) |
2 - 3 hr.
22 min. | |