Chemlok® 220 Adhesive Where to Buy
Product Information
LORD Chemlok® 220 adhesive is a covercoat adhesive designed for use over Chemlok 205 primer. This adhesive system will bond a wide variety of elastomers such as natural rubber (NR), styrene-butadiene (SBR), polychloroprene (CR), nitrile (NBR) and polyisoprene (IR) to various metals and other rigid substrates during vulcanization of the elastomer. It is composed of a mixture of polymers, organic compounds and mineral fillers dissolved or dispersed in an organic solvent system.
Shelf Life
Shelf life is two years from date of shipment when stored at 21-27°C (70-80°F) in original, unopened container. Do not store or use near heat, sparks or open flame.
Features and Benefits
Versatile - bonds a variety of elastomers and metals when used in combination with Chemlok 205 primer.
Environmentally Resistant - provides superior resistance to heat, water, salt spray, chemicals, oils, solvents and corrosive atmospheres.
Easy to Apply - applies easily by dip, spray or brush methods.
Typical Properties*
Appearance | Black Liquid |
Viscosity |
135-300 cps @ 25°C (77°F), Brookfield LVT, Spindle 1, 30 rpm 45-90 seconds, Zahn Cup #2 |
Density, kg/m3 (lb/gal) | 1000.0-1100.0 (8.3-9.2) |
Solids Content by Weight, % | 23-27 |
Flash Point, °C (°F) Seta |
28 (83) |
Solvents | Xylene, Perchloroethylene |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
LORD<sup>®</sup> LokRelease™ 100 Mold Release |
fast curing release agent designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no 1,1,1 trichloroethane or methylene chloride. |
LORD<sup>®</sup> LokRelease™ 100EZ Mold Release |
fast curing, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants; contains no 1,1,1 trichloroethane or methylene chloride. |
LORD<sup>®</sup> LokRelease™ 200 Aqueous Mold Release |
aqueous mold release is designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
LORD<sup>®</sup> LokRelease™ 300 Silicone-Free Mold Release |
silicone-free, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves mold efficiency in many processes including injection, compression and transfer molding of most rubber compounds including silicone. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |