Chemlok^® 305-1/310-B Black Epoxy Adhesive Where to Buy

single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM

Features and Benefits

Versatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no mixing required.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

primer for TPE/TPO/EPDM with UV tracer

Features and Benefits

UV Fluorescence - allows the primed substrate to fluoresce or glow when exposed to a UV light source; permits detection of improper wetting or surface skips.

Environmentally Friendly - formulated with acetone, lowering the amount of photochemically reactive solvent.

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no mixing required.

primer for TPE/TPO/EPDM

Features and Benefits

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

primer for TPE/TPO/EPDM

Features and Benefits

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no mixing required.

solvent-based surface treatment

Features and Benefits

Versatile - functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials.

Easy to Apply - applies easily by wipe, brush, dip or flood methods.

Convenient - requires no mixing.

Improved Adhesion - improves adhesion to cast urethanes and cured rubber.

Fast Drying - surface treatment flashes off within five minutes or less.

Environmentally Resistant - promotes increased environmental resistance by allowing the treated surface to be more easily wet.

fast curing release agent designed for use with molded elastomers

Features and Benefits

Process Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding.

Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry.

Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no 1,1,1 trichloroethane or methylene chloride.

fast curing, nontransferable release agent

Features and Benefits

Process Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding.

Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry.

Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants; contains no 1,1,1 trichloroethane or methylene chloride.

aqueous mold release is designed for use with molded elastomers

Features and Benefits

Process Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves molding efficiency in many processes including injection, compression and transfer molding.

Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems.

Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds.

silicone-free, nontransferable release agent

Features and Benefits

Process Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves mold efficiency in many processes including injection, compression and transfer molding of most rubber compounds including silicone.

Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems.

Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds.