Chemlok® 6016 Adhesive Where to Buy
Product Information
LORD Chemlok® 6016 adhesive is a general purpose adhesive used to bond a variety of elastomers to various metals. It is composed of a mixture of polymers, organic compounds and mineral fillers dissolved or dispersed in an organic solvent system.
Chemlok 6016 adhesive is a non-chlorinated solvent adhesive that can be applied as a one- or two-coat system depending on environmental conditions.
Elastomers:
Natural Rubber (NR)
Polyisoprene (IR)
Styrene-butadiene (SBR)
Polychloroprene (CR)
Nitrile (NBR)
Butyl (IIR)
EPDM Polymers
Shelf Life
Shelf life is one year from date of shipment when stored at 21-27°C (70-80°F) in original, unopened container.
Features and Benefits
Versatile – bonds a variety of elastomers and can be used over Chemlok 205 or 207 primer for maximum protection or when environmental conditions are severe.
Non-Chlorinated Solvent System – suitable for solvent incineration, saving cost of recovery equipment.
Excellent Appearance – provides continuous film appearance.
Easy to Apply – provides slow evaporation rate suitable for spray applications.
Typical Properties*
Appearance | Black Liquid |
Viscosity, seconds Zahn Cup #3 |
35 - 100 |
Density, kg/m3 (lb/gal) | 960.0 - 1010.0 (8.0 - 8.4) |
Solids Content by Weight, % | 24.5 - 27.5 |
Flash Point, °C (°F) Seta |
27 (80) |
Solvents | Xylene |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
Chemlok<sup>®</sup> 205 Adhesive and/or Primer |
general purpose primer Features and BenefitsVersatile – can be used as a primer under a wide variety of Chemlok covercoat adhesives such as the Chemlok 220 series, Chemlok 230 series, Chemlok 250 series or Chemlok 6000 series adhesives. Convenient – can be used as a one-coat adhesive to bond some nitrile rubber compounds to rigid substrates during vulcanization. Easy to Apply – applies easily by brush, dip, spray or roll coat methods; suitable for existing production lines. Durable – provides rubber tearing bonds and excellent environmental resistance when used in combination with Chemlok covercoat adhesives. |
Chemlok<sup>®</sup> 205A Primer |
general purpose primer Features and BenefitsVersatile – can be used as a primer under a wide variety of Chemlok covercoat adhesives such as the Chemlok 220 series, Chemlok 230 series or Chemlok 250 series adhesives. Environmentally Friendly – dilutable with aromatic solvents, reducing the number of solvents in plant inventory. Easy to Apply – applies easily by brush, dip, spray or roller coat methods; suitable for existing production lines. Durable – provides rubber tearing bonds and outstanding environmental resistance when used in combination with Chemlok covercoat adhesives. Convenient – requires only a single coat application to bond some nitrile rubber compounds to rigid substrates during vulcanization. |
Chemlok<sup>®</sup> 205LH Primer |
low HAP general purpose primer Features and BenefitsVersatile - can be used as a primer under a variety of Chemlok covercoat adhesives such as the Chemlok 6125 series or Chemlok 6254 series adhesives. Easy to Apply - applies easily by brush, dip, spray or roll coat methods; suitable for existing production lines. Durable - provides rubber tearing bonds and excellent environmental resistance when used in combination with Chemlok covercoat adhesives. Identifiable Appearance - provides a brilliant blue color for easy identification when used over phosphatized substrates. Environmentally Friendly - contains low HAP content (3.6 lb HAP/gal solid or 6.45% HAP content). |
Chemlok<sup>®</sup> 207 Primer |
high performance primer Features and BenefitsExcellent Adhesion - provides excellent adhesion to many different metal substrates including aluminum and mechanically or chemically treated cold rolled steel. Heat Resistant - when used in combination with Chemlok 259 covercoat adhesive, demonstrates excellent resistance to hot solutions of ethylene glycol and water on rubber-to-metal bonded parts. |
Chemlok<sup>®</sup> 207LH Primer |
low HAP primer Features and BenefitsEasy to Apply – applies easily by brush, dip, spray or roll coat methods; suitable for existing production lines. Durable – provides rubber tearing bonds and excellent environmental resistance when used in combination with Chemlok 6411LH covercoat adhesive. Identifiable Appearance – provides a brilliant blue color for easy identification when used over phosphatized substrates. Environmentally Friendly – contains low HAP content (2.4 lb HAP/gal solid or 3.88% HAP content). Environmentally Resistant – provides excellent resistance to a wide range of environmental conditions including hot solutions of ethylene/propylene glycol and water. |
Chemlok<sup>®</sup> 2000 Primer |
general purpose primer Features and BenefitsVersatile - can be used as a primer under a wide variety of Chemlok covercoat adhesives such as the Chemlok 230 series or Chemlok 6000 series adhesives. Convenient - suitable for existing production lines; can be applied by using brush, dip, spray or roller coat methods. Durable - provides rubber tearing bonds and excellent environmental resistance when used in combination with Chemlok covercoat adhesives. Identifiable Appearance - provides a brilliant blue color for easy identification when used over phosphatized substrates. |
Chemlok<sup>®</sup> EP5080-11 Primer |
clear Chemlok 205 primer/NBR adhesive Features and BenefitsVersatile - can be used as a primer under a wide variety of Chemlok covercoat adhesives such as the Chemlok 220 series, Chemlok 230 series or Chemlok 250 series adhesives. Easy to Apply - applies easily by brush, dip, spray or roll coat methods; suitable for existing production lines. Durable - provides rubber tearing bonds and excellent environmental resistance when used in combination with Chemlok covercoat adhesives. Fluid Resistant - provides excellent resistance to ASTM Oils #1 and #3 and Reference Fuel B. Convenient - requires only a single coat application to bond nitrile rubber compounds to rigid substrates during vulcanization. |
LORD<sup>®</sup> LokRelease™ 100 Mold Release |
fast curing release agent designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no 1,1,1 trichloroethane or methylene chloride. |
LORD<sup>®</sup> LokRelease™ 100EZ Mold Release |
fast curing, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants; contains no 1,1,1 trichloroethane or methylene chloride. |
LORD<sup>®</sup> LokRelease™ 200 Aqueous Mold Release |
aqueous mold release is designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
LORD<sup>®</sup> LokRelease™ 300 Silicone-Free Mold Release |
silicone-free, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves mold efficiency in many processes including injection, compression and transfer molding of most rubber compounds including silicone. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |