Chemlok® 610 Adhesive Where to Buy
Product Information
LORD Chemlok® 610 adhesive is a one-coat, aqueous (water-based) adhesive used to bond fluoroelastomers, polyacrylates, ethylene acrylic and peroxide vulcanizing EPDM elastomers to metals and textiles. It can also be used as a coating to protect metals against corrosion.
Shelf Life
Shelf life is two years from date of shipment when stored at 21-27°C (70-80°F) in original, unopened container. Do not freeze product.
Features and Benefits
Versatile - bonds a variety of specialty elastomers to metals and textiles.
Easy to Apply - low viscosity allows for easy application.
Environmentally Friendly - uses water for dilution; provides reduced VOC emissions.
Typical Properties*
| Appearance | Orange to Red Liquid |
| Density, kg/m3 (lb/gal) | 982.6 (8.2) |
| Solids Content by Weight, % | 2.5-3.0 |
|
Flash Point, °C (°F) Seta |
>93 (>200) |
| Solvents | Deionized Water |
| pH | 10-14 |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| LORD<sup>®</sup> LokRelease™ 100 Mold Release |
|
fast curing release agent designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 100EZ Mold Release |
|
fast curing, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 200 Aqueous Mold Release |
|
aqueous mold release is designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
| LORD<sup>®</sup> LokRelease™ 300 Silicone-Free Mold Release |
|
silicone-free, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves mold efficiency in many processes including injection, compression and transfer molding of most rubber compounds including silicone. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Product Brochure/Bulletin/Sell Sheet | Elastomer Adhesives & Coatings for the Oil & Gas Industry | |
|
|
Selector Guide | Chemlok Adhesives Selector Guide | |
|
|
Technical Data Sheet | Chemlok 610 Adhesive | |
|
|
Safety Data Sheet | CHEMLOK 610 |