Chemlok® 6150 Adhesive Where to Buy
LORD Chemlok® 6150 adhesive is a one-coat adhesive used to bond a variety of elastomers to various substrates during vulcanization of the elastomer. It is composed of a mixture of polymers, organic compounds and mineral fillers dissolved or dispersed in an organic solvent system.
A single coat of Chemlok 6150 adhesive will bond compounds based on natural rubber (NR), polyisoprene (IR), styrene-butadiene (SBR), polybutadiene (BR), polychloroprene (CR), nitrile (NBR), butyl (IIR), EPDM and polyepichlorohydrin (ECO) polymers to a variety of metals. These metals include carbon and alloy steels, stainless steel, aluminum, copper and copper alloys, magnesium and zinc, as well as a variety of plastics, composites and fabrics.
Shelf life is six months from date of shipment when stored in a well ventilated area at 21-27°C (70-80°F) in original, unopened container. Do not store or use near heat, sparks or open flame. Avoid excessive exposure to high humidity. Keep container tightly closed when not in use. Once opened, fit the 55-gallon drum of adhesive with desiccant tubes. Information on desiccant tubes can be obtained from your LORD Technical Service Representative.
Chemlok 6150 adhesive has thixotropic properties, therefore a yogurt-like consistency might be observed when opening the container. If a yogurt-like consistency does develop, thoroughly mix the adhesive with high speed agitator until it returns to a homogeneous liquid.
Features and Benefits
Convenient – requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.
Versatile – bonds a wide variety of elastomers to metals, plastics and fabrics; suitable for existing production lines; tolerates a wide variety of stock formulations.
Durable – provides rubber tearing bonds; provides superior adhesion to plated metals, lowering scrap rates.
Viscosity, cps @ 25°C (77°F)
Spindle 2, 30 rpm
|Density, kg/m3 (lb/gal)||930-980 (7.8-8.1)|
|Solids Content by Weight, %||21.0-25.0|
Flash Point, °C (°F)
*Data is typical and not to be used for specification purposes.