Flocklok® 852 Flock Adhesive Where To Buy
LORD Flocklok® 852 adhesive is a single-coat adhesive used to adhere polyester or nylon flock fibers to a variety of elastomers including EPDM, NR, CR and SBR. Flocked substrates provide good resistance to abrasion. Flocklok 852 flock adhesive will react and cure with moisture; however, an elevated temperature cure is required to optimize adhesion and performance properties.
Shelf life is one year from date of manufacture when stored in a well ventilated area at 21-27°C (70-80°F) in original, unopened container. If not stored at ambient temperature, equilibrate container at ambient temperature for 48 hours prior to initial mixing and use. Do not store or use near heat, sparks or open flame. Store container out of direct sunlight.
After opening and while removing contents, protect adhesive from excessive exposure to moisture by installing desiccant cartridges in the cover and/or using dry nitrogen as an inert cover. Do not leave container open.
Features and Benefits
Versatile - performs under a wide range of cure conditions.
Excellent Adhesion - provides excellent adhesion to a wide variety of elastomers and types of flock.
Process Compatible - may be used on-line or off-line; can be catalyzed to achieve faster set time.
Viscosity, seconds @ 25°C (77°F)
Zahn Cup #2
|Density, kg/m3 (lb/gal)||982.6-1006.5 (8.2-8.4)|
|Solids Content by Weight, %||50-55|
Flash Point, °C (°F)
|Solvents||Xylene, Methyl Isobutyl Ketone (MIBK), Acetates|
*Data is typical and not to be used for specification purposes.