Flocklok® 853A Flock Adhesive Where To Buy
LORD Flocklok® 853A adhesive is a blocked, heat-curing, single-coat adhesive used to adhere polyester or nylon flock fibers to a variety of elastomers including EPDM, NR, CR and SBR. Flocked substrates provide good resistance to abrasion.
Shelf life is six months from date of shipment when stored in a well ventilated area at 21-27°C (70-80°F) in original, unopened container. If not stored at ambient temperature, equilibrate container at ambient temperature for 48 hours prior to initial mixing and use. Do not store or use near heat, sparks or open flame. Store container out of direct sunlight.
After opening and while removing contents, protect adhesive from excessive exposure to moisture by installing desiccant cartridges in the cover and/or using dry nitrogen as an inert cover. Do not leave container open.
Features and Benefits
Easy to Use - slower evaporation rate provides longer open time on warm rubber for on-line extrusion.
Excellent Adhesion - provides excellent adhesion to a wide variety of elastomers and types of flock.
Convenient - requires no mixing of a cross-linker.
Process Compatible - can be catalyzed to achieve faster set time.
Viscosity, cps @ 25°C (77°F)
Spindle 3, 30 rpm
|Viscosity, seconds @ 25°C (77°F), Zahn Cup #2||35-60|
|Density, kg/m3 (lb/gal)||970.6-994.5 (8.1-8.3)|
|Solids Content by Weight, %||46.5-50.5|
Flash Point, °C (°F)
|Solvents||Toluene, Xylene, Methyl Isobutyl Ketone (MIBK), Acetates, Aromatic Petroleum Distillates, Acetone|
*Data is typical and not to be used for specification purposes.