Fusor® 110B/111B Metal Bonding Adhesive (Fast) Where To Buy
Product Information
Fusor® 110B/111B adhesive is a two-component, acrylic-based metal bonding adhesive offering faster cure time than typical panel bonding adhesives. Fusor 110B/111B adhesive can be used for patch panel bonding and weld bonding of properly prepared dissimilar metals, cab corners, panel sections and aluminum trailer repair patches.
Fusor 110B = 7.1 oz (210 mL)
Fusor 111B = 1.7 oz (50 mL)
Shelf Life
Shelf life is 18 months from date of manufacture when stored
at 75°F (24°C) in original, unopened container.
Substrates
Bare Metal, Steel, Aluminum
OEM Approvals
GM, Ford, Honda/Acura, Mazda, Nissan
Features and Benefits
Snap Cure – provides fast room temperature cure, resulting in reduced cycle times.
Versatile – bonds a variety of metal, including steel and aluminum; no welding required; can be riveted and resistance welded.
Environmentally Resistant – acrylic chemistry provides excellent corrosion protection over epoxy adhesives.
Applications
Patch panel bonding and weld bonding of properly prepared dissimilar metals, cab corners, panel sections and aluminum trailer repair patches.
Typical Properties*
| Appearance | Green Paste |
| Base Chemistry | Acrylic 2K |
| Work Time | 5 minutes @ 70°F (21°C) |
| Clamp Time | 20 minutes @ 70°F (21°C) |
| Cure Time | 2 hours @ 70°F (21°C) |
*Data is typical and not to be used for specification purposes.
Guns and Accessories
| Fusor<sup>®</sup> 703 Adhesion Prep/Cleaner | |
|
Removes silicones and contaminants. Use prior to applying adhesives, sealers and coatings. Removes brake dust from wheels
Features and Benefits• Fusor 703 = 32 oz (946.3 mL) |
| Fusor<sup>®</sup> 300 Manual 50 mL Dispensing Gun | |
|
For use with 1.7 oz (50 mL) cartridges, manually dispenses both 1:1 and 2:1 cartridges with no conversion necessary
Features and Benefits• For use with 1.7oz (50 mL) cartridges |
| Fusor<sup>®</sup> 517 Replacement Plunger for Manual 50 mL Dispensing Gun | |
|
1:1 and 2:1 plunger for use on Fusor 300 manual dispensing gun |
| Fusor<sup>®</sup> 304 Pneumatic 300/225 mL Dispensing Gun | |
|
For use with 7.6 oz (225 mL) and 10.1 oz (300 mL) cartridges, for use with 1:1 and 2:1 cartridges
Features and Benefits• For use with 10.1/7.6 oz (300/225 mL) cartridges |
| Fusor<sup>®</sup> 400/416 Red Power Mixing Tips | |
|
For use with all 1:1 and 2:1, 1.7 oz (50 mL) cartridges
Features and Benefits• Fusor 400 = package of 12 |
| Fusor<sup>®</sup> 401/417 Red Power 300/225 mL Cartridges Mixing Tips | |
|
For use with all 1:1 and 2:1, 10.1 oz (300 mL) and 7.6 oz (225 mL) cartridges
Features and Benefits• Fusor 401 = package of 12 |
| Fusor<sup>®</sup> 907 Cabinet | |
|
Allows easy accessibility, stocking and storage of Fusor adhesives and accessories
Features and Benefits• Allows easy accessibility, stocking and storage of Fusor adhesives and accessories |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Safety Data Sheet | Fusor 110B 111B Metal Bonding Adh Pt B | |
|
|
Product Catalog | Fusor Repair Adhesives Catalog | |
|
|
Technical Data Sheet | Fusor® 110B/111B Metal Bonding Adhesive | |
|
|
Repair Videos | Center Pillar Installation | |
|
|
Repair Videos | Doorskin Installation | |
|
|
Repair Videos | Quarter Panel Installation | |
|
|
Repair Videos | Quarter Panel Weld Bond Installation | |
|
|
Repair Videos | Roof Panel Installation - Full Replacement | |
|
|
Repair Videos | Roof Panel Installation - Sectioning | |
|
|
Repair Videos | Roof Panel Installation - Weld Bond | |
|
|
Safety Data Sheet | FUSOR 110B, 111B METAL BONDING ADH PT A |
OEM Approvals
| Title | OEM | Bulletin ID | Model/Vehicle | Year | Repair Procedure | Product Name |
|---|---|---|---|---|---|---|
| Install Rim Flange Wheel Ring | FORD | 12-03-18 | Edge | 2007-2010 |
Install Rim Flange Wheel Ring |
Fusor 111B |
| Panel Replacement - Rear Door Outer | General Motors | Pontiac G6 | 2005 |
Panel Replacement - Rear Door Outer |
Fusor 108B, Fusor 110B | |
| Panel Replacement - Front Door Outer | General Motors | Hummer H2 | 2003 |
Panel Replacement - Front Door Outer |
Fusor 108B, Fusor 110B, Fusor 121/124 Foam | |
| Body Rear End Panel Replacement | General Motors | Pontiac G6 | 2005 |
Body Rear End Panel Replacement |
Fusor 108B, Fusor 110B | |
| Body Rear End Replacement | General Motors | Pontiac G6 | 2005 |
Body Rear End Replacement |
Fusor 108B, Fusor 110B | |
| Quarter Panel Sectioning - Outer (Sedan) | General Motors | Pontiac G6 | 2005 |
Quarter Panel Sectioning - Outer (Sedan) |
Fusor 108B, Fusor 110B | |
| Quarter Panel Sectioning - Outer (Sedan) | General Motors | Chevrolet Malibu | 2004 |
Sectioning Outer Quarter Panel (Sedan) |
Fusor 108B, Fusor 110B | |
| Quarter Panel Sectioning - Outer (Extended Sedan) | General Motors | Chevrolet Malibu | 2004 |
Sectioning Outer Quarter Panel (Extended Sedan) |
Fusor 108B | |
| Body Rear End Panel Replacement | General Motors | Chevrolet Malibu | 2004 |
Replacement Rear End Body Panel |
Fusor 108B | |
| Metal Panel Bonding General Guidelines | General Motors | 02-08-98-001/ 6449G | All Passenger Cars and Trucks | 2003 and Prior |
Lord Fusor 108/109B and Fusor 110B/111B adhesives meet or exceed GM6448G, Automotive (Metallic) Panel Bonding Performance Guideline |
Fusor 108B, Fusor 110B |
| Bumper Replacement - Front | General Motors | 1239593-SIE | Chevrolet SSR |
Replace Front Bumper |
Fusor 108B | |
| Plastic, Metal & Composite Repairs | Peterbilt | 5.0 Materials & Components: Repairs | 387 | 2013 |
Plastic, Metal & Composite Repairs |
100EZ, 110B, 108B, 120/T20/T21, T19, T22, T23, 127EZ |