m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD® 309-1D/309-2D Epoxy Adhesive Where To Buy


Product Information

LORD® 309-1D/309-2D adhesive is a high performance, thixotropic, two-component epoxy adhesive system used for applications that require gap filling or non-sag characteristics on a vertical surface. This adhesive system provides excellent adhesion to prepared metals, fiberglass reinforced plastics (FRP), wood, prepared rubber, and other materials.

LORD 309-1D/309-2D adhesive can be either room temperature cured or heat cured for faster processing.

Shelf Life

Shelf life is two years from date of manufacture when stored at 60-80°F (16-27°C) in original, unopened container.

Features and Benefits

Durable – provides load bearing properties equal to or greater than the materials being bonded.

Environmentally Recommended – contains no solvent, nonflammable and virtually odorless.

Environmentally Resistant – resists moisture, sunlight and weathering.

Temperature Resistant – performs at temperatures from -30°F to +250°F (-34°C to +121°C).

Chemically Resistant – resists dilute acids, alkalis, solvents, greases and oils.

Excellent Engineering Properties – provides low shrinkage, good creep properties and low water absorption.

Typical Properties*

Work Time, hr @ 75°F (24°C)
54 g mass
1.5-2
Time to Handling Strength**, hr 8-16
Cure Time**, hr 24
Mixed Appearance Blue-green Paste
Mixed Solids Content by Weight, % 100

*Data is typical and not to be used for specification purposes.
**Can be accelerated with heat.

Auxiliary Products

LORD<sup>®</sup> 459T Adhesion Enhancer/Surface Modifier

single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM

Features and Benefits

Versatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no mixing required.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 459X Adhesion Enhancer/Surface Modifier

single-component primer in xylene solvent, diluted for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), Polyolefins (TPOs) and EPDM; meets California's VOC requirements

Features and Benefits

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 7701 Adhesion Enhancer/Surface Modifier

single-component, solvent-based surface treatment for various vulcanized, thermoplastic polymeric materials

Features and Benefits

Versatile – functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials.

Easy to Apply – applies easily by wipe, brush, dip or flood methods.

Convenient – requires no mixing.

Improved Adhesion – improves adhesion to cast urethanes and cured rubber.

Fast Drying – adhesion enhancer/surface modifier flashes off within five minutes or less.

Environmentally Resistant – promotes increased environmental resistance by allowing the treated surface to be more easily wet.

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download MSDS (US) LORD 309-1D
Download MSDS (US) LORD 309-2D
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Technical Data Sheet LORD 309-1D/309-2D and LORD 309-1DGB/309-2D Epoxy Adhesives
Download Application Guide Structural Adhesive Bonding Application Guide
Download MSDS (US) LORD 309-1D
Download MSDS (US) LORD 309-2D

Contact Us