m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD® 360-A/360-B Epoxy Adhesive Where To Buy


Product Information

LORD® 360 adhesive is an equal-mix, two-component epoxy adhesive system used in applications requiring rapid cure at room temperature.

Shelf Life

Shelf life is two years from date of manufacture when stored at 60-80°F (16-27°C) in original, unopened container.

Features and Benefits

Easy to Use - prepackaged kits include resin and hardener in the proper ratio, reducing material waste and increasing productivity.

Versatile - provides excellent adhesion to scuffed SMC, FRP, wood and other plastics; reaches handling strength in approximately 5 minutes at room temperature.

Environmentally Recommended - contains no solvent, nonflammable and virtually odorless.

Environmentally Resistant - resists high humidity, water, salt spray and temperature extremes.

Minimal Sag - provides minimal sag when applied on vertical or overhead surfaces, allowing for greater process flexibility.

Typical Properties*

Work Time, min @ 75°F (24°C)
54 g mass
2-4
Time to Handling Strength**, min @ 65-100°F (18-38°C) 5-10
Cure Time**, hr 24
Mixed Appearance Tan Paste
Mixed Solids Content by Weight, % 100

*Data is typical and not to be used for specification purposes.

Guns and Accessories

LORD-Pak™ 50 Replacement 1:1 and 2:1 Plunger
1:1 and 2:1 plunger for use on LORD-Pack 50 manual dispensing gun
LORD-Pak™ 50 Manual Dispensing Gun
handheld, manual dispensing system for small jobs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4” bead = 4.5 ft per 50 mL cartridge.

Mixing Tip 0.25 x 6 x 21 elm. (package of 12)
0.25 x 6 x 21 element, package of 12 - For use with 50 mL
Mixing Tip 0.25 x 6 x 21 elm. (package of 144)
0.25 x 6 x 21 element, package of 144

Auxiliary Products

LORD<sup>®</sup> 459T Adhesion Enhancer/Surface Modifier

single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM

Features and Benefits

Versatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no mixing required.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 459X Adhesion Enhancer/Surface Modifier

single-component primer in xylene solvent, diluted for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), Polyolefins (TPOs) and EPDM; meets California's VOC requirements

Features and Benefits

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 7701 Adhesion Enhancer/Surface Modifier

single-component, solvent-based surface treatment for various vulcanized, thermoplastic polymeric materials

Features and Benefits

Versatile – functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials.

Easy to Apply – applies easily by wipe, brush, dip or flood methods.

Convenient – requires no mixing.

Improved Adhesion – improves adhesion to cast urethanes and cured rubber.

Fast Drying – adhesion enhancer/surface modifier flashes off within five minutes or less.

Environmentally Resistant – promotes increased environmental resistance by allowing the treated surface to be more easily wet.

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download Safety Data Sheet LORD 360B
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Technical Data Sheet LORD 360 Epoxy Adhesive
Download Application Guide Structural Adhesive Bonding Application Guide

Contact Us