m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD® 403 Acrylic Adhesive Where To Buy


Product Information

LORD® 403 acrylic adhesive in combination with LORD Accelerator 19 or 19GB can be used to replace welding, brazing, riveting and other mechanical fastening methods. The 403/19 and 403/19GB adhesive systems perform particularly well in low-temperature environments and applications that are subject to high impact or high peel loads.

LORD 403 acrylic adhesive, when mixed with LORD Accelerator 19 or 19GB, creates an adhesive system that bonds a wide variety of prepared or unprepared metals and engineered plastics. The 403-19 and 403-19GB adhesive systems are specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive.

LORD 403 acrylic adhesive can be mixed with either LORD Accelerator 19 or LORD Accelerator 19GB. LORD Accelerator 19 improves the high temperature resistance of LORD 403 acrylic adhesive, and is available in off-white or black. LORD Accelerator 19GB allows precise control of the adhesive bondline thickness due to its content of glass beads. LORD Accelerator 19GB is available in off-white, red or grey.

Shelf Life

Typical shelf life is nine months when stored below 80°F (27°C) in original, unopened container. Storage temperatures of 40-50°F (4-10°C) are recommended. If stored cold, allow product to return to room temperature before using. Protect from exposure to direct sunlight.

LORD 403 acrylic adhesive is flammable. Do not store or use near heat, sparks or open flame.

Features and Benefits

Versatile – bonds a wide range of unprepared metals with minimal substrate preparation, as well as engineered thermoplastics including XENOY®, polycarbonate, ABS and acrylics.

Temperature Resistant – performs at temperatures from -40°F to +300°F (-40°C to +149°C).

Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV exposure.

Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.

UL Rated – when mixed with LORD Accelerator 19, adhesive system is UL 746C certified.

XENOY is a trademark of General Electric Company.

Typical Properties*

Appearance Off-white to Tan Paste
Viscosity, cP @ 77°F (25°C)
Brookfield
100,000 - 300,000
Density, lb/gal (kg/m3) 9.25 - 9.55 (1108 - 1144)
Flash Point, °F (°C)
Closed Cup
59 (15)
Working Time, min @ 75°F (24°C) 2 - 4
Time to Handling Strength, min @ 75°F (24°C)
50 psi Shear
4 - 6
Full Cure Time**, hr @ 75°F (24°C) 24
Mixed Appearance Color dependent on accelerator used
Mixed Solids Content by Weight, % 100

*Data is typical and not to be used for specification purposes.
**Reaches 90% of ultimate strength after 2 hours.

Guns and Accessories

LORD-Pak™ CX Manual Dispensing Gun (Configured for 10:1)
manual dispensing system utilizing a coaxial cartridge containing two adhesive parts

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 38.5 ft per 380 mL cartridge.

LORD-Pak™ CX Manual Dispensing Gun (Configured for 4:1)
manual dispensing system utilizing a coaxial cartridge containing two adhesive parts

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 38.5 ft per 380 mL cartridge.

LORD-Pak™ CX Pneumatic Dispensing Gun
pneumatic dispensing system utilizing a coaxial cartridge containing two adhesive parts

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 38.5 ft per 380 mL cartridge.
• Maximum dispense pressure = 100 psi.
• Pneumatic air requirements = clean, dry, non-lubricated air or non-flammable gas, 3.2 scfm or less @ 100 psi. Max. air inlet = 1/8" NPT (female). Safety relief valve pop-off = 115 psi.

LORD-Pak™ 50 4:1 Plunger
4:1 plunger for use on LORD-Pack 50 manual dispensing gun
LORD-Pak™ 50 Manual Dispensing Gun
handheld, manual dispensing system for small jobs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4” bead = 4.5 ft per 50 mL cartridge.

LORD-Pak™ 375 mL Cartridge Manual Dispensing Gun
side-by-side, snap-together cartridge systems for manual dispensing
LORD-Pak™ 375 mL Cartridge Pneumatic Dispensing Gun
side-by-side, snap-together cartridge systems for pnuematic dispensing
Mixing Tip 0.25 x 6 x 21 elm. (package of 12)
0.25 x 6 x 21 element, package of 12 - For use with 50 mL
Mixing Tip 0.25 x 6 x 21 elm. (package of 144)
0.25 x 6 x 21 element, package of 144
Mixing Tip 0.375 x 9 x 24 elm. (package of 12)
0.375 x 9 x 24 element, package of 12 - For use with CX
Mixing Tip 0.375 x 9.5 x 24 elm. (package of 12)
0.375 x 9.5 x 24 element, package of 12
Mixing Tip 0.25 x 7.5 x 24 elm. (package of 12)
0.25 x 7.5 x 24 element, package of 12

Auxiliary Products

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> Accelerator 17

mix-in accelerator; 10:1 mix ratio

Features and Benefits

Convenient - provides room temperature cure with all LORD acrylic adhesives.

Environmentally Friendly - contains no solvent, non-flammable and virtually odorless.

Environmentally Resistant - resists common environmental conditions when used with LORD acrylic adhesives.

LORD<sup>®</sup> Accelerator 19

mix-in accelerator; 2:1 or 4:1 mix ratio

Features and Benefits

Convenient – provides room temperature cure with all LORD acrylic adhesives.

Environmentally Friendly – contains no solvent, non-flammable and virtually odorless.

Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.

Temperature Resistant – improves high temperature resistance of LORD 200, 400 and 500 series acrylic adhesives.

LORD<sup>®</sup> Accelerator 19 Black

mix-in accelerator; 2:1 or 4:1 mix ratio

Features and Benefits

Convenient – provides room temperature cure with all LORD acrylic adhesives.

Environmentally Friendly – contains no solvent, non-flammable and virtually odorless.

Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.

Temperature Resistant – improves high temperature resistance of LORD 200, 400 and 500 series acrylic adhesives.

LORD<sup>®</sup> Accelerator 19GB

mix-in accelerator; 2:1 or 4:1 mix ratio

Features and Benefits

Convenient – provides room temperature cure with all LORD acrylic adhesives.

Environmentally Friendly – contains no solvent, non-flammable and virtually odorless.

Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.

Temperature Resistant – improves high temperature resistance of LORD 200, 400 and 500 series acrylic adhesives.

LORD<sup>®</sup> Accelerator 19GB Grey

mix-in accelerator; 2:1 or 4:1 mix ratio

Features and Benefits

Convenient – provides room temperature cure with all LORD acrylic adhesives.

Environmentally Friendly – contains no solvent, non-flammable and virtually odorless.

Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.

Temperature Resistant – improves high temperature resistance of LORD 200, 400 and 500 series acrylic adhesives.

LORD<sup>®</sup> Accelerator 19GB Red

mix-in accelerator; 2:1 or 4:1 mix ratio

Features and Benefits

Convenient – provides room temperature cure with all LORD acrylic adhesives.

Environmentally Friendly – contains no solvent, non-flammable and virtually odorless.

Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.

Temperature Resistant – improves high temperature resistance of LORD 200, 400 and 500 series acrylic adhesives.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download Safety Data Sheet LORD 403E
Download Safety Data Sheet LORD 403
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Technical Data Sheet LORD 403, 406 and 410 Acrylic Adhesives with LORD Accelerator 19 or 19GB
Download Technical Service Bulletins Volatility of LORD 400 Series
Download Powder Coating after Bonding with LORD 400 Series Acrylic Adhesives
Download Troubleshooting Guide LORD 400 Series Acrylic Adhesives Troubleshooting Guide
Download Application Guide Structural Adhesive Bonding Application Guide

Contact Us