m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD® 506 Acrylic Adhesive Where To Buy


Product Information

LORD® 506 acrylic adhesive when cured with LORD Accelerator 4, 17 or 19 creates a semi-flexible adhesive system that will quickly bond a wide variety of thermoplastics and thermoset plastics.

LORD 506 acrylic adhesive can be cured with either LORD Accelerator 4, LORD Accelerator 17 or LORD Accelerator 19. LORD Accelerator 4 is a no-mix accelerator applied to the substrate before the acrylic adhesive. LORD Accelerators 17 and 19 must be mixed into the acrylic adhesive prior to application. LORD Accelerator 19 is available in off-white or black.

Shelf Life

Shelf life is six months when stored below 80°F (27°C) in original, unopened container. Storage temperatures of 40-50°F (4-10°C) are recommended. If stored cold, allow product to return to room temperature before using.

Features and Benefits

Versatile - bonds a wide variety of substrates including ABS, acrylic, polycarbonate, FRP, prepared metals, urethane, phenolic, polysulfone, and vinyl; can be used with both Mix-In and No-Mix accelerators.

Convenient - cures very quickly at room temperature.

Durable - accommodates shock and sudden stress loading.

Temperature Resistant - performs at temperatures from -40°F to +300°F (-40°C to +149°C).

Environmentally Resistant - resists dilute acids, alkalis, solvents, greases, oils and moisture; provides excellent resistance to indirect UV exposure and weathering.

Typical Properties*

Appearance Colorless to Amber Gel
Viscosity, cP @ 77°F (25°C)
Brookfield HBT
Spindle 3, 5 rpm
20,000-70,000
Density, lb/gal (kg/m3) 8.25-8.65 (989-1036)
Flash Point, °F (°C)
Closed Cup
53 (11)
Work Time, min @ 75°F (24°C) 4-6
Time to Handling Strength**, min @ 75°F (24°C) 8-12
Cure Time, hr 24
Mixed Appearance Color dependent on accelerator used

*Data is typical and not to be used for specification purposes.
**Dependent on ambient air temperature and mass; established when adhesive reaches 100 psi.

Guns and Accessories

Mixing Tip 0.25 x 7.5 x 24 elm. (package of 12)
0.25 x 7.5 x 24 element, package of 12
Mixing Tip 0.375 x 9.5 x 24 elm. (package of 12)
0.375 x 9.5 x 24 element, package of 12
Mixing Tip 0.25 x 6 x 21 elm. (package of 12)
0.25 x 6 x 21 element, package of 12 - For use with 50 mL
Mixing Tip 0.25 x 6 x 21 elm. (package of 144)
0.25 x 6 x 21 element, package of 144
LORD-Pak™ CX Pneumatic Dispensing Gun
pneumatic dispensing system utilizing a coaxial cartridge containing two adhesive parts

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 38.5 ft per 380 mL cartridge.
• Maximum dispense pressure = 100 psi.
• Pneumatic air requirements = clean, dry, non-lubricated air or non-flammable gas, 3.2 scfm or less @ 100 psi. Max. air inlet = 1/8" NPT (female). Safety relief valve pop-off = 115 psi.

LORD-Pak™ CX Manual Dispensing Gun (Configured for 4:1)
manual dispensing system utilizing a coaxial cartridge containing two adhesive parts

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 38.5 ft per 380 mL cartridge.

LORD-Pak™ 50 Replacement 1:1 and 2:1 Plunger
1:1 and 2:1 plunger for use on LORD-Pack 50 manual dispensing gun
LORD-Pak™ 50 Manual Dispensing Gun
handheld, manual dispensing system for small jobs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4” bead = 4.5 ft per 50 mL cartridge.

Auxiliary Products

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> Accelerator 17

mix-in accelerator; 10:1 mix ratio

Features and Benefits

Convenient - provides room temperature cure with all LORD acrylic adhesives.

Environmentally Friendly - contains no solvent, non-flammable and virtually odorless.

Environmentally Resistant - resists common environmental conditions when used with LORD acrylic adhesives.

LORD<sup>®</sup> Accelerator 19

mix-in accelerator; 2:1 or 4:1 mix ratio

Features and Benefits

Convenient – provides room temperature cure with all LORD acrylic adhesives.

Environmentally Friendly – contains no solvent, non-flammable and virtually odorless.

Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.

Temperature Resistant – improves high temperature resistance of LORD 200, 400 and 500 series acrylic adhesives.

LORD<sup>®</sup> Accelerator 4

no-mix accelerator; use with bond thickness of 20 mils or less

Features and Benefits

Convenient – provides room temperature cure with all LORD acrylic adhesives.

Extended Work Time – provides extended assembly time as adhesive does not begin cure until it comes in contact with surface coated with dry accelerator.

Easy to Apply – applies easily by brush, wipe, spray or dip methods onto one or both bonding surfaces.

Fast Cure – dries in approximately one minute to an off-white crystalline film.

Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download Safety Data Sheet LORD 506
Download MSDS (US) LORD 506 Degassed
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Technical Data Sheet LORD 506 Acrylic Adhesive
Download Application Guide Structural Adhesive Bonding Application Guide

Contact Us