m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD® 7150 Urethane Adhesive Where To Buy


Product Information

LORD® 7150 adhesive is a two-part, high strength urethane adhesive used to bond cloth, paper, plastics, foams, rubber, painted metals and powder coated metals. LORD 7150-A resin is composed of isocyanate. LORD 7150-B curative is composed of polyol.

This adhesive can be either room temperature cured or heat cured for faster processing. LORD 7150 adhesive cures to a unique gray color.

Shelf Life

Shelf life is six months when stored in a clean, dry environment at 65-85°F (18-30°C) in original, unopened container. 

After opening, protect adhesive from excessive exposure to moisture by installing desiccant cartridges and/or using dry nitrogen as an inert cover.

Features and Benefits

Convenient - reduces material and labor costs by eliminating the need to prime many plastics.

Durable - creates high strength bonds to plastics without crazing, attacking or lowering the strength of the plastic substrate.

Non-Flammable - does not require explosion-proof equipment.

Environmentally Recommended - no VOC content; does not contain ozone depleting chemicals.

Chemically Resistant - solvent resistant when cured.

Environmentally Resistant - resists weathering and aging.

Typical Properties*

Work Time**, min @ 77°F (25°C) 5-10
Time to Handling Strength**, hr @ 73°F (23°C) 2-3
Cure Time**, hr 24
Mixed Solids Content by Weight, % 100

*Data is typical and not to be used for specification purposes.
**Can be accelerated with heat.

Guns and Accessories

Mixing Tip 0.25 x 6 x 21 elm. (package of 12)
0.25 x 6 x 21 element, package of 12 - For use with 50 mL
Mixing Tip 0.25 x 6 x 21 elm. (package of 144)
0.25 x 6 x 21 element, package of 144
Mixing Tip 0.375 x 11 x 24 elm. (package of 12)
0.375 x 11 x 24 element, package of 12
LORD-Pak™ 200 Manual Dispensing Gun
larger handheld, manual dispensing system for field repairs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 19 ft per 200 mL cartridge.

LORD-Pak™ 200 Pneumatic Dispensing Gun
larger handheld, pneumatic dispensing system for production applications

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 19 ft per 200 mL cartridge.

LORD-Pak™ 50 Replacement 1:1 and 2:1 Plunger
1:1 and 2:1 plunger for use on LORD-Pack 50 manual dispensing gun
LORD-Pak™ 50 Manual Dispensing Gun
handheld, manual dispensing system for small jobs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4” bead = 4.5 ft per 50 mL cartridge.

Auxiliary Products

LORD<sup>®</sup> 459T Adhesion Enhancer/Surface Modifier

single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM

Features and Benefits

Versatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no mixing required.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 459X Adhesion Enhancer/Surface Modifier

single-component primer in xylene solvent, diluted for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), Polyolefins (TPOs) and EPDM; meets California's VOC requirements

Features and Benefits

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 7701 Adhesion Enhancer/Surface Modifier

single-component, solvent-based surface treatment for various vulcanized, thermoplastic polymeric materials

Features and Benefits

Versatile – functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials.

Easy to Apply – applies easily by wipe, brush, dip or flood methods.

Convenient – requires no mixing.

Improved Adhesion – improves adhesion to cast urethanes and cured rubber.

Fast Drying – adhesion enhancer/surface modifier flashes off within five minutes or less.

Environmentally Resistant – promotes increased environmental resistance by allowing the treated surface to be more easily wet.

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download Safety Data Sheet LORD 7150 A
Download MSDS (US) LORD 7150 B
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Technical Data Sheet LORD 7100 and 7150 Urethane Adhesives
Download Application Guide Structural Adhesive Bonding Application Guide

Contact Us