m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD® 7542 Urethane Adhesive Where To Buy


Product Information

LORD® 7542 adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive will also bond primed metals. LORD 7542 adhesive system is available in a range of working times to accommodate a wide variety of process requirements.

Shelf Life

Shelf life is six months when stored in a clean, dry environment at 65-85°F (18-30°C) in original, unopened container. Excluding LORD 7542-B Black curative and LORD 7542-C curative, prolonged exposure to temperatures below 50°F (10°C) during shipping or storage may cause variations in cured properties and/or significant reduction in shelf life.

After opening, protect adhesive from excessive exposure to moisture by installing desiccant cartridges and/or using dry nitrogen as an inert cover.

Features and Benefits

Non-Flammable - does not require explosion-proof equipment.

Environmentally Recommended - does not contain ozone depleting chemicals.

Environmentally Resistant - resists sunlight, weathering, humidity and salt spray.

Chemically Resistant - solvent resistant when cured. Painting and most cleaning processes do not affect bond strength.

UL Rated - UL 746C certified.

*Data is typical and not to be used for specification purposes.
**Given a 1/2 inch (12.7 mm) bead. Can be accelerated with heat.

Guns and Accessories

Mixing Tip 0.25 x 6 x 21 elm. (package of 12)
0.25 x 6 x 21 element, package of 12 - For use with 50 mL
Mixing Tip 0.25 x 6 x 21 elm. (package of 144)
0.25 x 6 x 21 element, package of 144
LORD-Pak™ 50 Replacement 1:1 and 2:1 Plunger
1:1 and 2:1 plunger for use on LORD-Pack 50 manual dispensing gun
LORD-Pak™ 50 Manual Dispensing Gun
handheld, manual dispensing system for small jobs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4” bead = 4.5 ft per 50 mL cartridge.

LORD-Pak™ 200 Manual Dispensing Gun
larger handheld, manual dispensing system for field repairs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 19 ft per 200 mL cartridge.

LORD-Pak™ 200 Pneumatic Dispensing Gun
larger handheld, pneumatic dispensing system for production applications

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 19 ft per 200 mL cartridge.

Mixing Tip 0.5 x 11.5 x 24 elm. (package of 12)
0.5 x 11.5 x 24 element, package of 12
Mixing Tip 0.375 x 11 x 24 elm. (package of 12)
0.375 x 11 x 24 element, package of 12

Auxiliary Products

LORD<sup>®</sup> 459T Adhesion Enhancer/Surface Modifier

single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM

Features and Benefits

Versatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no mixing required.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 459X Adhesion Enhancer/Surface Modifier

single-component primer in xylene solvent, diluted for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), Polyolefins (TPOs) and EPDM; meets California's VOC requirements

Features and Benefits

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 7701 Adhesion Enhancer/Surface Modifier

single-component, solvent-based surface treatment for various vulcanized, thermoplastic polymeric materials

Features and Benefits

Versatile – functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials.

Easy to Apply – applies easily by wipe, brush, dip or flood methods.

Convenient – requires no mixing.

Improved Adhesion – improves adhesion to cast urethanes and cured rubber.

Fast Drying – adhesion enhancer/surface modifier flashes off within five minutes or less.

Environmentally Resistant – promotes increased environmental resistance by allowing the treated surface to be more easily wet.

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Technical Data Sheet LORD 7542 Urethane Adhesive
Download Application Guide Structural Adhesive Bonding Application Guide
Download MSDS (US) LORD 7542A
Download MSDS (US) LORD 7542B
Download Safety Data Sheet LORD 7542E
Download Safety Data Sheet LORD 7542D
Download Safety Data Sheet LORD 7542B BLACK
Download Safety Data Sheet LORD 7542B BLACK-R
Download Safety Data Sheet LORD 7542B GRN
Download Safety Data Sheet LORD 7542C

Contact Us