m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD® 7555 Urethane Adhesive/Sealant Where To Buy


Product Information

LORD® 7555 adhesive/sealant is an equal-mix, two-component bright white urethane adhesive/sealant system used to bond and seal a variety of plastics and prepared metals.

Shelf Life

Shelf life of each component is six months when stored in a clean, dry environment at 50-80°F (10-27°C) in original, unopened container.

After opening, protect adhesive/sealant from excessive exposure to moisture by replacing protective cap on the cartridge.

Features and Benefits

Non-Sag – full-bodied urethane formula holds bead pattern on horizontal surfaces, allowing for greater processing flexibility; non-slumping.

Fast Cure – LORD 7555-A/7555-C adhesive/sealant develops handling strength within 60 minutes, ideal for smaller bonding and sealing applications.

Immediate Paintability – offers immediate paint time, improving throughput.

Extended Work Time – LORD 7555-A/7555-E adhesive/sealant offers longer working time, allowing for use on larger projects where more time is required.

Non-Flammable – does not require explosion-proof equipment.

Environmentally Recommended – no VOC content; does not contain ozone depleting chemicals.

Environmentally/UV Resistant – resists sunlight, weathering, humidity and salt spray; bright white color will not yellow.

Chemically Resistant – solvent resistant when cured. Painting and most cleaning processes do not affect bond strength.

*Data is typical and not to be used for specification purposes.

Guns and Accessories

LORD-Pak™ 50 Manual Dispensing Gun
handheld, manual dispensing system for small jobs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4” bead = 4.5 ft per 50 mL cartridge.

LORD-Pak™ 50 Replacement 1:1 and 2:1 Plunger
1:1 and 2:1 plunger for use on LORD-Pack 50 manual dispensing gun
LORD-Pak™ 400 or 485 mL Cartridge Manual Dispensing Gun
larger handheld, manual dispensing system for field repairs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 46 ft per 485 mL cartridge.

LORD-Pak™ 400 or 485 mL Cartridge Pneumatic Dispensing Gun
larger handheld, pneumatic dispensing system for production applications

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 46 ft per 485 mL cartridge.

Mixing Tip 0.25 x 6 x 21 elm. (package of 12)
0.25 x 6 x 21 element, package of 12 - For use with 50 mL
Mixing Tip 0.25 x 6 x 21 elm. (package of 144)
0.25 x 6 x 21 element, package of 144
Mixing Tip 0.375 x 11 x 24 elm. (package of 12)
0.375 x 11 x 24 element, package of 12

Auxiliary Products

LORD<sup>®</sup> 459T Adhesion Enhancer/Surface Modifier

single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM

Features and Benefits

Versatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no mixing required.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 459X Adhesion Enhancer/Surface Modifier

single-component primer in xylene solvent, diluted for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), Polyolefins (TPOs) and EPDM; meets California's VOC requirements

Features and Benefits

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 7701 Adhesion Enhancer/Surface Modifier

single-component, solvent-based surface treatment for various vulcanized, thermoplastic polymeric materials

Features and Benefits

Versatile – functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials.

Easy to Apply – applies easily by wipe, brush, dip or flood methods.

Convenient – requires no mixing.

Improved Adhesion – improves adhesion to cast urethanes and cured rubber.

Fast Drying – adhesion enhancer/surface modifier flashes off within five minutes or less.

Environmentally Resistant – promotes increased environmental resistance by allowing the treated surface to be more easily wet.

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download Safety Data Sheet LORD 7555 A
Download MSDS (US) LORD 7555 C
Download Safety Data Sheet LORD 7555 E
Download Technical Data Sheet LORD 7555 Urethane Adhesive/Sealant
Download Product Brochure/Bulletin/Sell Sheet LORD 7555A/C and 7555A/E Urethane Adhesive/Sealant Sell Sheet
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Application Guide Structural Adhesive Bonding Application Guide

Contact Us