m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD® 7610DTM Direct-to-Metal Adhesive/Sealant Where To Buy


Product Information

LORD® 7610DTM direct-to-metal adhesive/sealant is a single-component, moisture-cure product offering excellent adhesion to various substrates including many plastics, glass, concrete, wood and metals, especially precoated metals.

Shelf Life

Shelf life is 15 months when stored in a well ventilated area at or below 80°F (27°C) in original, unopened container. Once cartridge has been opened, leave the dispense tip on to act as a seal against moisture.

Features and Benefits

Durable – creates high strengh bonds, replacing mechanical fastening methods; exhibits excellent primerless adhesive properties.

Convenient – requires no mixing; cures quickly even at low temperatures; requires no ovens or other heat sources for curing.

Chemically Resistant – solvent resistant when cured. Painting and most cleaning processes do not affect bond strength.

Non-Sag - remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.

Temperature Resistant – uncured material can endure 255°F (107°C) for 60 minutes, and cured material can endure 325°F (163°C) for 60 minutes with no negative effect.

Environmentally Resistant - resists weathering and aging; provides excellent resistance to indirect UV exposure.

Environmentally Recommended - low VOC content; contains no solvent.

Typical Properties*

Appearance White
Skin Time, min @ 77°F (25°C)
50% RH
15-45
Work Time, min @ 77°F (25°C)
50% RH
25-35
Time to Handling Strength, hr @ 77°F (25°C)
50% RH
6-12
Paint Time Immediately;
up to 30 days without a scuff

Cured Typical Properties*

Hardness,
Shore A
50
Tensile Strength, psi (MPa) 200 (1.38) minimum
Lap Shear Strength, psi (MPa) 200-500 (1.38-3.45)
Elongation, %
ASTM D412
400 minimum

*Data is typical and not to be used for specification purposes.

Auxiliary Products

LORD<sup>®</sup> 459T Adhesion Enhancer/Surface Modifier

single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM

Features and Benefits

Versatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no mixing required.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 459X Adhesion Enhancer/Surface Modifier

single-component primer in xylene solvent, diluted for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), Polyolefins (TPOs) and EPDM; meets California's VOC requirements

Features and Benefits

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> 7701 Adhesion Enhancer/Surface Modifier

single-component, solvent-based surface treatment for various vulcanized, thermoplastic polymeric materials

Features and Benefits

Versatile – functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials.

Easy to Apply – applies easily by wipe, brush, dip or flood methods.

Convenient – requires no mixing.

Improved Adhesion – improves adhesion to cast urethanes and cured rubber.

Fast Drying – adhesion enhancer/surface modifier flashes off within five minutes or less.

Environmentally Resistant – promotes increased environmental resistance by allowing the treated surface to be more easily wet.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download Safety Data Sheet LORD 7610DTM WHITE
Download Safety Data Sheet LORD 7610DTM BLACK
Download Safety Data Sheet LORD 7610DTM GREY
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Technical Data Sheet LORD 7610DTM Direct-to-Metal Adhesive/Sealant
Download Application Guide Structural Adhesive Bonding Application Guide

Contact Us