m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD® Signlok™ 810 Adhesive Where to Buy


Product Information

LORD® Signlok™ 810 adhesive is a two-component adhesive system designed for bonding metals, such as aluminum, aluminum composite material (ACM), galvanized steel and CRS, and engineered plastics, such as PC-ABS**. LORD Signlok 810 adhesive delivers fast cure speed and strong bonding with minimal bondline read-through (BLRT).

**When bonding to engineered plastics blends, it may be necessary to verify adhesive performance prior to customer builds. Please contact your LORD representative or LORD Customer Support for further guidance.

Shelf Life

Shelf life is nine months when stored below 77°F (25°C) in original, unopened container. Storage temperatures of 50-60°F (10-15°C) are recommended. If stored cold, allow product to return to room temperature before using. Protect from exposure to direct sunlight.

After dispensing product from cartridge, remove the mixing tip immediately and install supplied cartridge plugs to avoid cured adhesive from plugging cartridge.

LORD Signlok 810 adhesive is flammable. Do not store or use near heat, sparks or open flame.

Features and Benefits

Aesthetics – bonds thin and flexible substrates with little to no bondline read-through.

Convenient – requires little or no substrate preparation for bonding metals and plastics.

Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.

Precise Bondline – allows precise control of the adhesive bondline thickness due to its content of glass beads.

Environmentally Resistant - resists dilute acids, alkalis, solvents, greases, oils and moisture; provides excellent resistance to UV exposure and weathering.

UL Approved Adhesive – UL 746C certified.

Uncured Typical Properties*

Mixed Appearance Grey Paste
Mixed Solids Content by Weight, % 100
Working Time, min @ 70°F (21°C) 8 - 12
Time to Handling Strength, min @ 70°F (21°C) 20 - 25
Full Cure Time, hr @ 75°F (24°C) 24

Cured Typical Properties*

Hardness**, Shore D 40
Tensile Strength at Break**, psi (MPa) 841 (5.8)
Lap Shear Strength**, psi (MPa) 1441 (9.94)
Elongation**, % 190
Glass Transition Temperature (Tg)**, °F (°C) 109 (43)

*Data is typical and not to be used for specification purposes.
**Data obtained from material cured at room temperature.

Guns and Accessories

LORD-Pak™ 50 Manual Dispensing Gun
handheld, manual dispensing system for small jobs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4” bead = 4.5 ft per 50 mL cartridge.

LORD-Pak™ 50 Replacement 1:1 and 2:1 Plunger
1:1 and 2:1 plunger for use on LORD-Pack 50 manual dispensing gun
LORD-Pak™ 50 4:1 Plunger
4:1 plunger for use on LORD-Pack 50 manual dispensing gun
Mixing Tip 0.25 x 6 x 21 elm. (package of 12)
0.25 x 6 x 21 element, package of 12 - For use with 50 mL
Manual Dispensing Gun for LORD Signlok Adhesives (Configured for 2:1)
side-by-side, snap-together cartridge systems for manual dispensing
Pneumatic Dispensing Gun for LORD Signlok Adhesives (Configured for 2:1)
side-by-side, snap-together cartridge systems for manual dispensing
Mixing Tip, Square 8.7" x 24 elm. (package of 12)
For use with all 1:1 and 2:1, 10.1 oz (300 mL) and 7.6 oz (225 mL) cartridges
LORD-Pak™ CX Manual Dispensing Gun (Configured for 4:1)
manual dispensing system utilizing a coaxial cartridge containing two adhesive parts

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4" bead = 38.5 ft per 380 mL cartridge.

Mixing Tip 0.375 x 9.5 x 24 elm. (package of 12)
0.375 x 9.5 x 24 element, package of 12
LORD-Pak™ 375 mL Cartridge Manual Dispensing Gun
side-by-side, snap-together cartridge systems for manual dispensing
Mixing Tip 0.375 x 9 x 24 elm. (package of 12)
0.375 x 9 x 24 element, package of 12 - For use with CX
Mixing Tip 0.375 x 9 x 24 elm. (package of 144)
0.375 x 9 x 24 element, package of 144

Auxiliary Products

LORD<sup>®</sup> Accelerator 20GB

mix-in accelerator; 2:1 mix ratio

Features and Benefits

Convenient – provides room temperature cure with all LORD acrylic adhesives.

Environmentally Recommended – contains no solvent, non-flammable and virtually odorless.

Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.

Bondline Control – allows precise control of adhesive bondline thickness due to content of glass beads, 10 mil (250 μm) diameter.

Literature

Download Type Name
Download Technical Data Sheet LORD Signlok 810 Adhesive
Download Safety Data Sheet LORD Signlok 810 Adhesive PT A
Download Safety Data Sheet LORD Signlok 810 Adhesive PT B

Contact Us