m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD Maxlok™ MX/T18 Acrylic Adhesive Where To Buy


Product Information

LORD Maxlok™ MX/T18 acrylic adhesive replaces welding, brazing, riveting and other mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads.

Shelf Life

Shelf life of each component is six months when stored at temperatures under 80°F (27°C) in original, unopened container. For maximum shelf life, storage temperatures of 40-50°F (4-10°C) are recommended. If stored at these cooler temperatures, allow product to return to room temperature before using. Protect from exposure to direct sunlight.

LORD Maxlok MX/T18 acrylic adhesive is flammable. Do not store or use near heat, sparks or open flame.

Features and Benefits

Versatile – bonds a wide range of unprepared metals with minimal substrate preparation.

Temperature Resistant – performs at temperatures from -40°F to +300°F (-40°C to +149°C).

Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV exposure.

Precise Bondline – allows precise control of adhesive bondline thickness due to its content of glass beads, 0.01" (0.025 cm) diameter.

Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.

Typical Properties*

Mixed Appearance Grey Paste
Mixed Solids Content by Weight, % 100
Working Time, min @ 77°F (25°C) 18 - 24
Time to Handling Strength, min @ 77°F (25°C)
50 psi Shear
48 - 72
Cure Time, hr 24

*Data is typical and not to be used for specification purposes.

Guns and Accessories

LORD-Pak™ 375 mL Cartridge Manual Dispensing Gun
side-by-side, snap-together cartridge systems for manual dispensing
LORD-Pak™ 375 mL Cartridge Pneumatic Dispensing Gun
side-by-side, snap-together cartridge systems for pnuematic dispensing
Mixing Tip 0.34" x 5.8" x 24 elm. (package of 12)
0.34" x 5.8" x 24 element, package of 12
Mixing Tip 0.34" x 5.8" x 24 elm. (package of 144)
0.34" x 5.8" x 24 element, package of 144

Auxiliary Products

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download Safety Data Sheet LORD MAXLOK (TM) T18
Download Safety Data Sheet LORD Maxlok (TM) MX
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Technical Data Sheet Maxlok MX/T3, MX/T6 and MX/T18 Acrylic Adhesives
Download Application Guide Structural Adhesive Bonding Application Guide

Contact Us