m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

LORD Maxlok™ MX/T6 Acrylic Adhesive Where To Buy


Product Information

LORD Maxlok™ MX/T6 acrylic adhesive replaces welding, brazing, riveting and other mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads.

Shelf Life

Shelf life of each component is six months when stored at temperatures under 80°F (27°C) in original, unopened container. For maximum shelf life, storage temperatures of 40-50°F (4-10°C) are recommended. If stored at these cooler temperatures, allow product to return to room temperature before using. Protect from exposure to direct sunlight.

LORD Maxlok MX/T6 acrylic adhesive is flammable. Do not store or use near heat, sparks or open flame.

Features and Benefits

Versatile – bonds a wide range of unprepared metals with minimal substrate preparation.

Temperature Resistant – performs at temperatures from -40°Fto +300°F (-40°C to +149°C).
Note: Based on test results, LORD Maxlok MX/T6 adhesive system exhibits post bake/powder coating temperature resistance up to 400°F (204°C) for 90 minutes. Customer specific substrates should always be evaluated for specific application performance.

Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV exposure.

UL Approved Adhesive - Maxlok MX/T6 adhesive system is UL 746C certified.

Precise Bondline – allows precise control of adhesive bondline thickness due to its content of glass beads, 0.01" (0.025 cm) diameter.

Non-Sag remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.

Typical Properties*

Mixed Appearance Grey Paste
Mixed Solids Content by Weight, % 100
Working Time, min @ 77°F (25°C) 6 - 9
Time to Handling Strength, min @ 77°F (25°C)
50 psi Shear
20 - 24
Cure Time, hr 24

*Data is typical and not to be used for specification purposes.

Guns and Accessories

Mixing Tip 0.34" x 5.8" x 24 elm. (package of 12)
0.34" x 5.8" x 24 element, package of 12
Mixing Tip 0.34" x 5.8" x 24 elm. (package of 144)
0.34" x 5.8" x 24 element, package of 144
Mixing Tip 0.25 x 6 x 21 elm. (package of 12)
0.25 x 6 x 21 element, package of 12 - For use with 50 mL
Mixing Tip 0.25 x 6 x 21 elm. (package of 144)
0.25 x 6 x 21 element, package of 144
LORD-Pak™ 375 mL Cartridge Manual Dispensing Gun
side-by-side, snap-together cartridge systems for manual dispensing
LORD-Pak™ 375 mL Cartridge Pneumatic Dispensing Gun
side-by-side, snap-together cartridge systems for pnuematic dispensing
LORD-Pak™ 50 4:1 Plunger
4:1 plunger for use on LORD-Pack 50 manual dispensing gun
LORD-Pak™ 50 Manual Dispensing Gun
handheld, manual dispensing system for small jobs

Features and Benefits

• Approximate linear coverage of mixed adhesive, dispensed as 1/4” bead = 4.5 ft per 50 mL cartridge.

Auxiliary Products

LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier

single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates

Features and Benefits

Versatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier

single-component, low viscosity, reactive polymer primer; for glass and ceramics

Features and Benefits

Versatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass.

Easy to Apply - applies easily by spray, dip or polyester felt applicator.

Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.

Literature

Download Type Name
Download Safety Data Sheet LORD Maxlok™ T6
Download Safety Data Sheet LORD Maxlok (TM) MX
Download Selector Guide LORD Structural Adhesives Selector Guide
Download Technical Data Sheet Maxlok MX/T3, MX/T6 and MX/T18 Acrylic Adhesives
Download Application Guide Structural Adhesive Bonding Application Guide
Download Powder Coating after Bonding with LORD Acrylic Adhesives

Contact Us