m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

Acrylic Adhesives

LORD® Acrylic-Based Structural Adhesives

LORD acrylic-based structural adhesives deliver world-class performance in bonding to bare metals, composites and a large number of thermoplastic materials. The combination of excellent cure kinetics at room temperature and minimal need for surface preparation make acrylic adhesives the ideal choice for both automated and manual assembly processes. Our acrylic adhesives offer outstanding toughness that delivers impact resistance, excellent low- and high-temperature performance, and long service life on top of high structural strength.

What Are Acrylic Adhesives?

A key property of acrylic adhesives is that they can have a long room temperature open time but once they begin to react, they quickly reach handling strength. Click below to learn more...

 

LORD Maxlok Series:
 MX/T3, MX/T6, MX/T18

  • Bonds unprepared metals, composites & plastics
  • High impact resistance, high peel strength
  • Excellent environmental resistance
  • Glass bead filled for precise bondline
  • Withstands e-coat & powder coat cycles when bonds are supported stress free

LORD Maxlok Series Acrylic Adhesives

LORD 850 Series:
 850, 852

  • Toughened structural adhesive
  • Bonds plastics and prepared & unprepared metals
  • High impact, peel & fatigue resistance / low temp environments / 100% elongation
  • Withstands e-coat & powder coat cycles when bonds are supported stress free

LORD 850 Series Acrylic Adhesives

LORD 810/20GB:
 

  • Low read-through (LRT)
  • Ideal for glossy & flexible substrates
  • Low exotherm, low shrinkage
  • Glass bead filled for precise bondline
  • Excellent peel strength
  • Withstands e-coat & powder coat cycles when bonds are supported stress free

LORD 810/20GB Acrylic Adhesives

LORD 400 Series:
 403, 406, 410

  • Good adhesion to unprepared metals, plastics & fiber-reinforced plastics (FRP)
  • Withstands e-coat & powder coat cycles when bonds are supported stress free
  • Excellent cold impact & environmental resistance
  • Recommended for all types of metal assemblies

LORD 400 Series Acrylic Adhesives (color varies across series)

LORD 200 Series:
 201, 202, 204, 206

  • Good adhesion to unprepared metals & plastics
  • High sheer strength
  • Robust resin enables no-mix design flexibility
  • Limited cold impact resistance & high temerature resistance
  • Recommended for magnet bonding

LORD 200 Series Acrylic Adhesives (color varies across series)

LORD 600 Series:
 606, 661, 663

  • Bonds composites, cross bonds metals to plastics & composites
  • Best acrylic for sheet moulding compound (SMC) bonding
  • LORD 606 for small bead / fast handling time
  • LORD 661 & 663 for long work time / gap filling applications

LORD 600 Series Acrylic Adhesives

LORD 500 Series:
 506

  • Good adhesion to plastics
  • Not recommended for metals
  • Fast handling time at room temperature
  • Accomodates shock & sudden stress loading
  • Excellent environmental resistance

LORD 500 Series Acrylic Adhesives

Accelerators for Acrylic Adhesives

LORD Accelerators are curatives designed for use with LORD acrylic adhesives creating adhesive systems that will bond a variety of prepared or unprepared metals and plastics. Accelerators are available as Mix-In or No-Mix:

 
  • Mix-In Accelerators create a system with specific cure time and properties. For specific product mix options, refer to the product Technical Data Sheet.

  • No-Mix Accelerators allow for an indefinite open time for bonding. LORD Accelerator 4 can be used with LORD 200 series, 500 series and Maxlok T6 acrylic adhesives.

 

Features

  • 40+ years of trusted performance
  • Room temperature cure
  • High strength
  • Long term durability
  • Wide range of open times, fast strength build-up, short handling times
  • Bond dissimilar substrates, thinner, lighter materials
  • Resistant to diluted acids, alkalis, solvents, greases
  • Excellent corrosion and UV resistance
  • High temperature resistance, withstands e-coat and powder coat processes when bonds are supported stress-free
  • Non-sag, suitable for vertical applications
  • Available with glass beads for bondline thickness control

Substrates

  • Bare Metals
  • Plastics
  • Composites
  • Prepared Metals
  • Ceramics
  • Carbon Fiber
  • Glass

Product Offerings

  • Industrial adhesives and sealants for metal, composite and plastic
  •  
  • OEM and tier metal bonding adhesives and sealants
  •  
  • Two-component systems designed to support high volume and convenience dispensing
  •  
  • Aftermarket and repair solutions available to support customer life cycle

LORD Acrylic Adhesives - Most Popular Products
PRODUCT DESCRIPTION ACCELERATOR MIX RATIO
by Volume
MIXED APPEARANCE WORK TIME HANDLING TIME FULL CURE TIME TYPICAL VISCOSITY (cP)
High Strength
Metal Bonding
MAXLOK T3 Bonds prepared and unprepared metals, composites and plastics, high impact resistance, high peel strength, non-sag, resistance to indirect UV exposure, excellent environmental resistance, withstands e-coat and powder coat cycles if bonds are supported stress free MX 4:1 Grey Paste 3-5 min 6-8 min 24 hr 70,000-120,000
MAXLOK T6 6-9 min 20-24 min 24 hr 80,000-180,000
MAXLOK T18 18-24 min 48-72 min 24 hr 80,000-180,000
Specialty Metal Bonding 850 Bonds prepared and unprepared metals and engineered plastics, toughened structural adhesive, high impact, peel and fatigue resistance, low temperature environments, 100% elongation, non-sag, withstands e-coat and powder coat cycles when bonds are supported stress free 25GB 10:1 Red Paste 6-10 min 18-24 min 2 hr*** 100,000-500,000
852 20-25 min 50-70 min 5 100,000-500,000
810
UL 746C Certified Adhesive
Low Read-Through (LRT) adhesive for bonding metals and engineered plastics, ideal for glossy and flexible substrates, low exotherm, low shrinkage, withstands e-coat and powder coat cycles when bonds are supported stress free 20GB 2:1 Black Paste 8-12 min 20-25 min 24 hr 40,000-130,000
General Purpose Metal Bonding 403
UL 746C Certified Adhesive
Bonds prepared and unprepared metals, engineered plastics and FRP, recommended for all types of metal assemblies, excellent cold impact and environmental resistance, withstands e-coat and powder coat cycles when bonds are supported stress free, UL 746C certified 17
19, 19GB
19 Black
19GB Red
19GB Grey
10:1
4:1
4:1
4:1
4:1
Tan Paste
Black Paste
Red Paste
Grey Paste
2-4 min 4-6 min 24 hr* 100,000-300,000
406
UL 746C Certified Adhesive
6-10 min 12-17 min 24 hr 100,000-300,000
410
UL 746C Certified Adhesive
20-30 min 60-120 min 24 hr 100,000-300,000
201
UL 746C Certified Adhesive
Bonds prepared and unprepared metals, plastics and ceramics, selfleveling, flows into hard-to-reach places 4
17
19, 19GB
19 Black
No Mix
10:1
2:1
2:1
--
Tan Paste
Tan Paste
Grey Paste
5-8 min 12-16 min 24 hr 15,000-55,000
202 1-2 min 2-4 min 24 hr 8,000-32,000
204 Bonds prepared and unprepared metals, plastics and ceramics, non-sag 4
17
19, 19GB
19 Black
No Mix
10:1
2:1
2:1
--
Tan Paste
Tan Paste
Grey Paste
6-8 min 20-30 min 24 hr 100,000-300,000
206 Bonds prepared and unprepared metals, plastics and ceramics 12-14 min 45-60 min 24 hr 20,000-80,000
Composite and Cross Bonding 606 Bonds composites, cross bonds metals to plastics and composites, fast set, non-sag 6
6GB
10:1
10:1
Grey Paste 6-10 min 16-24 min 24 hr 100,000-300,000
661 Bonds composites, cross bonds metals to plastics and composites, non-sag, excellent for long work time, large beads and gap filling applications 6
6GB
10:1
10:1
Grey Paste 11-19 min** 45-55 min** 24 hr** 125,000-350,000
663 45-75 min** 130-160 min** 24 hr** 125,000-350,000
Plastic Bonding 506 Bonds wide variety of thermoplastics and thermoset plastics, fast handling time, durable, accomodates shock and sudden stress loading, resistance to indirect UV exposure 4
17
19
No Mix
10:1
2:1
Tan Gel 4-6 min 8-12 min 24 hr 20,000-70,000

*Reaches 90% of ultimate strength after 2 hours.
**Given a 1-inch diameter bead @ 90°F (32°C).
***Reaches 90% of ultimate strength after 1 hour.

Contact Us