Versilok® 271/331 Acrylic Adhesive Where to Buy
Product Information
LORD Versilok® 271/331 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals, including hot-dip galvanized, electro-galvanized, bare aluminum, and cold rolled steel. Versilok 271/331 adhesive can be either room temperature cured or heat cured for faster processing.
Glass beads are included in the adhesive system providing a mechanical lock between substrates. Versilok 271/331 adhesive also contains an odor suppressant. Versilok 271/331 adhesive is approved by Chrysler (MS-CD-500).
Shelf Life
Shelf life is six months from date of shipment when stored at 25°C (77°F) in original, unopened container.
Features and Benefits
Strong Mechanical Lock – contains glass beads which provide a mechanical lock that will prevent shifting of substrate panels.
Easy to Apply – utilizes non-sagging rheology; replaces the need for spot welding which degrades metal and allows rusting to occur.
Low Temperature Cure – develops a high strength bond in less than one hour at room temperature, eliminating metal warpage caused by high curing induction temperatures. Induction heating should be conducted at 110°C (230°F) or below.
Bonds Unprepared Metals – bonds exceptionally well through the various stamping lubricants typically present on metals, eliminating the need for advance cleaning and surface preparation.
Environmentally Resistant – provides excellent resistance to moisture, sunlight, salt spray and thermal cycling; sustains short exposure to postbakes up to 204°C (400°F).
Cured Typical Properties*
Elongation, % @ 25°C (77°F) | 20 - 30 |
T-Peel Strength, N/mm (pli) | >5.3 (>30) |
Impact Strength, N-m (in-lb) | >10.0 (>90) |
*Data is typical and not to be used for specification purposes.