Chemlok® 7701 Surface Treatment Where to Buy
Product Information
LORD Chemlok® 7701 surface treatment is a solvent-based surface treatment for use on various vulcanized and thermoplastic polymeric materials. Chemlok 7701 surface treatment chemically alters the surface of the rubber, making it more receptive to bonding. Do not apply to metal surfaces.
Chemlok 7701 surface treatment is used in conjunction with a broad range of LORD adhesives, including epoxy and urethane adhesives, for bonding cured rubber. It improves adhesion to a variety of cured and thermoplastic polymeric materials, including natural rubber, synthetic polyisoprene, SBR, butyl, polybutadiene, neoprene, EPDM, nitrile, polyurethane, styrene-butadiene block copolymers, styrene isoprene rubbers and polyvinyl chloride.
Shelf Life
Shelf life is six months from date of shipment when stored by the recipient at 21-27°C (70-80°F) in original, unopened container.
Avoid storage in lighted areas. Store material in original container or UV-filtering plastic or glass container. Do not store in metal containers. Store Chemlok 7701 surface treatment in a cool, dark area away from oil, grease, sawdust, floor sweepings, easily oxidized organic compounds, ammonia, amines, ammonia salts, and metallic materials. Do not contaminate with water or alcohol.
Features and Benefits
Versatile - functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials.
Easy to Apply - applies easily by wipe, brush, dip or flood methods.
Convenient - requires no mixing.
Improved Adhesion - improves adhesion to cast urethanes and cured rubber.
Fast Drying - surface treatment flashes off within five minutes or less.
Environmentally Resistant - promotes increased environmental resistance by allowing the treated surface to be more easily wet.
Typical Properties*
Appearance | Clear to Cloudy Liquid |
Density, kg/m3 (lb/gal) | 870.0-930.0 (7.3-7.8) |
Solids Content by Weight, % | 2.3-3.5 |
Flash Point, °C (°F) Seta |
-4 (25) |
Solvents | Ethyl Acetate |
*Data is typical and not to be used for specification purposes.