m

LORD Corporation

With more than 3,100 employees in 26 countries, 19 manufacturing facilities and 10 R&D centers worldwide, we're there for our customers.

Our Company

Autoseal® RC-3007 Coating Where To Buy


Product Information

LORD Autoseal® RC-3007 coating is an aqueous, weatherstrip coating designed for use on EPDM sponge seals to reduce noise (squeak & itch) from automotive vibration and impart ice-release characteristics. Autoseal RC-3007 coating is part of a two-pack system that uses either Autoseal 3462B cross-linker or Autoseal 3463B cross-linker.

Shelf Life

Shelf life is six months from date of shipment when stored in a well ventilated area at 21-27°C (70-80°F) in original, unopened container. Do not freeze product. Keep container closed when not in use.

Features and Benefits

Environmentally Friendly - provides a user friendly, low VOC coating.

Excellent Ice-Release - prevents ice from sticking to coated rubber.

Noise Reduction - reduces anti-static squeak and anti-itch noise from automobile vibration.

Typical Properties*

Appearance Black Liquid
Viscosity, seconds @ 25°C (77°F)
Zahn Cup #2
30-40
Density, kg/m3 (lb/gal) 998.2-1198.3 (8.33-10.0)
Solids Content by Weight, % 27-31
Flash Point, °C (°F) >94 (>201)

*Data is typical and not to be used for specification purposes.

Auxiliary Products

Autoseal<sup>®</sup> 3690 Primer

aqueous primer that provides good adhesion to EPDM rubber and various thermoplastic elastomers

Features and Benefits

Environmentally Friendly - provides a user friendly, low VOC coating.

Good Adhesion - adheres well to EPDM.

Convenient - applies easily using conventional, siphon, HVLP or needle-less spray methods.

Autoseal<sup>®</sup> 3463B Cross-linker

cross-linker used with Autoseal aqueous coatings to enhance performance of the cured system

Features and Benefits

Environmentally Friendly - provides low VOC for reduced emissions and improved environmental compliance.

Easy to Use - prepackaged kits include cross-linker and resin in the proper ratio.

Convenient - requires fewer processing steps as cross-linker does not need to be pre-diluted with water.

Durable - provides good stability in water; enhances solvent resistance of cured Autoseal coatings.

Chemlok<sup>®</sup> 459X Primer

primer for TPE/TPO/EPDM

Features and Benefits

Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.

Easy to Apply - low viscosity allows for easy application; no dilution necessary.

Literature

Download Type Name
Download MSDS (US) Autoseal RC-3007 Black
Download Selector Guide LORD Weatherstrip Coatings
Download Technical Data Sheet Autoseal RC-3007 Coating

Contact Us