CoolTherm® EP-6150 Epoxy Adhesive Where to Buy
LORD CoolTherm® EP-6150 adhesive is a one-component, thixotropic epoxy adhesive designed for use in the assembly of electronic components and devices.
CoolTherm EP-6150 adhesive offers good adhesion to a wide variety of substrates, and can be used in demanding high-end device assembly applications.
Shelf life is three months from date of manufacture when stored at 5°C in original, unopened container. Syringe must be stored in a vertical (upright) position with the dispense tip facing down. Do not store syringe on its side (horizontally).
If material is stored at 25°C, shelf life will be shortened to approximately one month.
Features and Benefits
Excellent Stability – provides excellent thermal stability.
Fast Cure – rapidly cures at 121°C and 177°C.
Chemically Resistant – provides excellent resistance to acids and strong bases.
Non-Sag – thixotropic rheology allows shape to be maintained after dispensing.
Uncured Typical Properties*
|Viscosity, cps @ 25°C||145,000|
10 min @ 121°C
1 min @ 177°C
30 min @ 121°C; or
10 min @ 177°C
Cured Typical Properties*
|Volume Resistivity, ohm-cm @ 25°C||>1 x 1015|
|Thermal Conductivity, W/mK||0.6|
|Glass Transition Temperature (Tg), °C||141|
|Hardness, @ 25°C, Shore D||90|
|Lap Shear Strength, psi, AL-AL||> 1600|
|Dielectric Strength, V/mil||450|
|Dielectric Constant, @ 25°C||3.9|
|Dissipation Factor, @ 25°C||0.03|
*Data is typical and not to be used for specification purposes.