CoolTherm® EP-6968 Conductive Adhesive Where to Buy
LORD CoolTherm® EP-6968 adhesive is a two-component, silver-filled conductive adhesive which offers excellent electrical conductivity, thermal conductivity and room temperature storage stability. It is designed for use as a circuit repair adhesive or for use in manual dispense applications where room temperature or low temperature cure is needed.
Shelf life of each component is six months from date of manufacture when stored at 25°C in original, unopened container.
Features and Benefits
Room Temperature Cure – suitable for curing at room temperature; may be mildly heat cured (65°C) to expedite cure.
Excellent Conductivity – provides excellent electrical and thermal conductivity for applications where superior electrical conductivity and heat dissipations are required.
Broad Temperature Range – can be used on parts and devices that experience operating temperatures from -50°C to +150°C.
Versatile – provides good adhesion to a wide variety of substrates including glass and most plastics.
Uncured Typical Properties*
|Mixed Appearance||Silver Cream|
|Mixed Viscosity, cps @ 25°C||250,000|
|Mixed Specific Gravity||2.9|
|Gel Time, min @ 25°C||60|
|Working Life, min @ 25°C||30|
24 hr @ 25°C; or
1 hr @ 65°C
Cured Typical Properties*
|Volume Resistivity, ohm-cm @ 25°C||< 0.001|
|Thermal Conductivity, W/mk||1.2|
|Coefficient of Linear Thermal Expansion, ppm/°C||42|
|Hardness, Shore D||84|
Lap Shear Strength, psi
*Data is typical and not to be used for specification purposes.