LORD® 459X Adhesion Enhancer/Surface Modifier Where To Buy
LORD® 459X adhesion enhancer/surface modifier is designed for promoting adhesion to thermoplastic elastomers (TPE), thermoplastic polyolefins (TPO) and EPDM. LORD 459X primer is in xylene solvent, diluted for direct application.
LORD 459X adhesion enhancer/surface modifier canbe used in conjunction with LORD acrylic adhesives, urethane adhesives and epoxy structural adhesives, as well as with a variety of double-sided tapes.
Shelf life is six months from date of shipment when stored at 70-80°F (21-27°C) in original, unopened container.
Features and Benefits
Versatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.
Easy to Apply - low viscosity allows for easy application; no dilution necessary.
Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.
Viscosity, cP @ 77°F (25°C)
Spindle 1, 60 rpm
|Density, lb/gal (kg/m3)||7.15-7.35 (857-881)|
|Solids Content by Weight, %||2.7-4.1|
Flash Point, °F (°C)
*Data is typical and not to be used for specification purposes.