LORD® Accelerator 20GB Where To Buy
LORD® Accelerator 20GB is a mix-in curative designed for use with LORD acrylic adhesives. LORD Accelerator 20GB, when mixed with LORD 800 series acrylic adhesives, creates an adhesive system that will bond a variety of prepared or unprepared metals and plastics.
Shelf life for LORD Accelerator 20GB is nine months when stored below 77°F (25°C) in original, unopened container. Shelf life can be extended by storing at temperatures of 50-65°F (10-18°C). Temperature excursions above 95°F (35°C) for extended periods of time (days or weeks) will result in reduced shelf life, indicated by increased viscosity and/or decreased cure speed related to reduced BPO content. If stored cold, allow product to return to room temperature before using. Do not freeze product.
Features and Benefits
Convenient – provides room temperature cure with all LORD acrylic adhesives.
Environmentally Recommended – contains no solvent, non-flammable and virtually odorless.
Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.
Bondline Control – allows precise control of adhesive bondline thickness due to content of glass beads, 10 mil (250 μm) diameter.
Viscosity, cP @ 77°F (25°C)
|200,000 - 400,000|
|Density, lb/gal (kg/m3)||13.7 - 14.2 (1640 - 1700)|
|Solids Content by Weight, %||98.5|
|Flash Point, °F (°C), Seta||>200 (>93)|
Press Flow, sec
80 psi @ 77°F (25°C)
0.052” (1.32 mm)
|25 - 65|
*Data is typical and not to be used for specification purposes.